Abstract:This Article puts forward a new idea to construct an electrode combining the advantages of a TiO2 nanotube photocatalyst and an excellent Sb-doped SnO2 electrocatalyst, which realized high electrocatalytic (EC) and photocatalytic (PC) oxidation efficiency at the same time. Under vacuum conditions, in virtue of the titanium oxide nanotubes (TiO2-NTs) as a template, well dispersed Sb-doped SnO2 (particle size 20 nm) was embedded into TiO2-NTs (diameter 60-90 nm and wall thickness 10-20 nm), resulting in the stake structured TiO2-NTs/Sb-doped SnO2 electrode (TiO2-NTs/SnO2). The loading amount of Sb-doped SnO2 on a TiO2-NTs/SnO2 electrode is 21.4 g m(-2), which is increased by 2 times compared with the situation of direct loading Sb-doped SnO2 on the Ti substrate (Ti/SnO2). The crystal lattice parameter of SnO2 becomes smaller, and crystal lattice parameter of TiO2 is larger, so the combination between TiO2-NTs and Sb-doped SnO2 becomes more tight. Compared with the electrochemical properties of Ti/SnO2, the apparent rate constant of benzoic acid (BA) conversion (k(s)) on the TiO2-NTs/SnO2 electrode is (1.44 +/- 0.04) x 10(-4) s(-1) and that of Ti/SnO2 is (1.0 +/- 0.03) x 10(-4) s(-1). Furthermore, its electrochemical stability and anti deactivation properties are greatly improved, and the accelerated service lifetime of the TiO2-NTs/SnO2 electrode is increased by 1.0 time. The initial instantaneous current efficiency of the degradation of BA on the TiO2-NTs/SnO2 electrode is 26.8%, and that on the Ti/SnO2 electrode is 13.3%. Compared with the PC properties of TiO2-NTs, the band gap of TiO2-NTs/SnO2 decreases from 3.22 to 2.93 eV, and the photoconversion efficiency is raised to 26.1 % from 8.2%. k(s) on TiO2-NTs/SnO2 is (0.82 +/- 0.02) x 10(-4) s(-1), and that of TiO2-NTs is (0.41 +/- 0.02) x 10(-4) s(-1). In the photoelectrocatalytic (PEC) aspect of BA, the current densities under 3.0 V increase by 4.0, 2.1, and 0.09 mA cm(-2) on the TiO2-NTs/SnO2, Ti/SnO2, and TiO2-NTs electrodes, respectively. The initial instantaneous current efficiency of the TiO2-NTs/SnO2 electrode increases to 100%, which is much higher than 41.7% and 31.3% on Ti/SnO2 and TiO2-NTs electrodes, respectively. k(s) on TiO2-NTs/SnO2 is (5.26 +/- 0.16) x 10(-4) s(-1), which is 3.2 times that of Ti/SnO2 and 4.8 times that of TiO2-NTs. The TiO2-NTs/SnO2 electrode has both excellent PC properties and excellent EC properties. After PEC degradation of BA on the electrode for 3.5 h, chemical oxygen demand (COD) removal is 100%. This research has enriched the PEC theory on the electrode's microstructured interface and developed a new idea for exploring highly efficient PEC technology.

Constructing Stake Structured Tio2-Nts/Sb-Doped Sno2 Electrode Simultaneously with High Electrocatalytic and Photocatalytic Performance for Complete Mineralization of Refractory Aromatic Acid

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

A Composite Sb-Doped Sno2 Electrode Based On The Tio2 Nanotubes Prepared By Hydrothermal Synthesis

Construction of TiO2 Nanotube Clusters on Ti Mesh for Immobilizing Sb-SnO2 to Boost Electrocatalytic Phenol Degradation.

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

Preparation of a novel Ni/Sb co-doped Ti/SnO2 electrode with carbon nanotubes as growth template by electrodeposition in a deep eutectic solvent

Enhanced Photoelectrocatalytic Performance for Degradation of Diclofenac and Mechanism with TiO2 Nano-Particles Decorated TiO2 Nano-Tubes Arrays Photoelectrode

Construction and Characterization of Visible Light Active Pd Nano-Crystallite Decorated and C-N-S-co-doped TiO 2 Nanosheet Array Photoelectrode for Enhanced Photocatalytic Degradation of Acetylsalicylic Acid

Preparation of Ti/SnO2–Sb2O4 Photoanode by Electrodeposition and Dip Coating for PEC Oxidations

Influence of Gd Doping on the Structure and Electrocatalytic Performance of TiO2 Nanotube/SnO2−Sb Nano‐coated Electrode

Synthesis of a novel Ti/TiO 2 Blue/SnO 2 -Sb@Ni-La electrode and the way to improve the degradation efficiency of some organic pollutants in electrochemical process using Ti/TiO 2 Blue/SnO 2 -Sb@Ni-La as anode

Enhanced mass transfer and service time of mesh Ti/Sb-SnO2 electrode for electro-catalytic oxidation of phenol

Constructing Heterojunction Interface of Co3O4/TiO2 for Efficiently Accelerating Acetaminophen Degradation Via Photocatalytic Activation of Sulfite

New Hierarchical Ti/SnO2-PbO2/CNT Electrode: Enhanced Electrochemical Properties and Improved Electrochemical Oxidation Towards Various Real Wastewaters

When Mxene Meet Ti/Pbo2: An Improved Electrocatalytic Activity and Stability

Titanium Carbide Composite Hollow Cobalt Sulfide Heterojunction with Function of Promoting Electron Migration for Efficiency Photo-Assisted Electro-Fenton Cathode

In situ chloride-mediated synthesis of TiO2 thin film photoanode with enhanced photoelectrochemical activity for carbamazepine oxidation coupled with simultaneous cathodic H2 production and CO2 conversion to fuels

NiFe Oxyhydroxide Decorated TiO2 Nanotube Photoanodes for Improved Photoelectrochemical Oxidation Performance

Design of BDD-TiO2 Hybrid Electrode with P−N Function for Photoelectrocatalytic Degradation of Organic Contaminants

New hierarchical Ti/SnO 2 -PbO 2 /CNT electrode: Enhanced electrochemical properties and improved electrochemical oxidation towards various real wastewaters

Coupling TiO2 Nanotubes Photoelectrode with Pd Nano-Particles and Reduced Graphene Oxide for Enhanced Photocatalytic Decomposition of Diclofenac and Mechanism Insights