Abstract:The catalytic conversion of dinitrogen (N-2) into ammonia under ambient conditions represents one of the Holy Grails in sustainable chemistry. As a potential alternative to the Haber-Bosch process, the electrochemical reduction of N-2 to NH3 is attractive owing to its renewability and flexibility, as well as its sustainability for producing and storing value-added chemicals from the abundant feedstock of water and nitrogen on earth. However, owing to the kinetically complex and energetically challenging N-2 reduction reaction (NRR) process, NRR electrocatalysts with high catalytic activity and high selectivity are rare. In this contribution, as a proof-of-concept, we demonstrate that both the NH3 yield and faradaic efficiency (FE) under ambient conditions can be improved by modification of the hematite nanostructure surface. Introducing more oxygen vacancies to the hematite surface renders an improved performance in NRR, which leads to an average NH3 production rate of 0.46 mu g h(-1) cm(-2) and an NH3 FE of 6.04 % at -0.9 V vs. Ag/AgCl in 0.10 m KOH electrolyte. The durability of the electrochemical system was also investigated. A surprisingly high average NH3 production rate of 1.45 mu g h(-1) cm(-2) and a NH3 FE of 8.28 % were achieved after the first 1 h chronoamperometry test. This is among the highest FEs reported so far for non-precious-metal catalysts that use a polymer-electrolyte-membrane cell and is much higher than the FE of precious-metal catalysts (e.g., Ru/C) under comparable reaction conditions. However, the NH3 yield and the FE dropped to 0.29 mu g h(-1) cm(-2) and 2.74 %, respectively, after 16 h of chronoamperometry tests, which indicates poor durability of the system. Our results demonstrate the important role that the surface states of transition-metal oxides have in promoting electrocatalytic NRR under ambient conditions. This work may spur interest towards the rational design of electrocatalysts as well as electrochemical systems for NRR, with emphasis on the issue of stability.

Ambient Electrochemical Nh3 Synthesis From N-2 And Water Enabled By Zro2 Nanoparticles

Efficient Electrocatalytic N2 Fixation with MXene under Ambient Conditions

Au Sub-Nanoclusters on TiO 2 toward Highly Efficient and Selective Electrocatalyst for N 2 Conversion to NH 3 at Ambient Conditions.

Ambient N2 Fixation to NH3 at Ambient Conditions: Using Nb2O5 Nanofiber As a High-Performance Electrocatalyst

Ambient Electro-Synthesis of Ammonia - Electrode Porosity and Composition Engineering

ZrO2/C Nanosphere Enables High‐Efficiency Nitrogen Reduction to Ammonia at Ambient Conditions

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Highly Selective Electrochemical Reduction Of Dinitrogen To Ammonia At Ambient Temperature And Pressure Over Iron Oxide Catalysts

Monodisperse Cu Cluster-Loaded Defective ZrO 2 Nanofibers for Ambient N 2 Fixation to NH 3

High-efficiency ammonia electrosynthesis via selective reduction of nitrate on ZnCo2O4 nanosheet array

Ambient electrosynthesis of ammonia with efficient denitration

High-Efficiency Electrosynthesis of Ammonia with Selective Reduction of Nitrate in Neutral Media Enabled by Self-Supported Mn 2 CoO 4 Nanoarray

Ambient Electroreduction of Nitrite to Ammonia over Ni Nanoparticle Supported on Molasses-Derived Carbon Sheets

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

An Amorphous WC Thin Film Enabled High-Efficiency N2 Reduction Electrocatalysis under Ambient Conditions.

A Simple Synthesis Of Co3o4@Cnt To Boost Electrochemical Nitrogen Fixation

Nitrogen-coordinated Single Fe Sites for Efficient Electrocatalytic N2 Fixation in Neutral Media

(Invited) Electrochemical Nitrogen Fixation under Ambient Conditions

Boosting Electrocatalytic Ammonia Synthesis from Nitrate with a Dual Active Site Three-Dimensional Copper Electrode

Electrocatalysis of N2 to NH3 by HKUST-1 with High NH3 Yield