Abstract:All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm–2 at 45 °C. The obtained all-solid-state LiFePO4–IS-CDL/Li batteries present a capacity of 142.6 mA h g–1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811–IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g–1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16390</a>.Preparation of high mass loading cathode; SEM image of pristine LATP nanoparticles; optical images of the solid electrolyte membrane; EIS spectra of Li/LFP–IS–CSL1 cells and Li/LFP–IS–CDL cells; impedance spectra of solid electrolyte membranes; digital photographs of the lithium metal surface; charge and discharge curves; voltage profile of a symmetric cell; and cycling performances, EIS spectra, and charge–discharge voltage profiles of NCM811 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16390/suppl_file/am0c16390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Suppressed Dendrite Formation Realized by Selective Li Deposition in All-Solid-state Lithium Batteries

Self-healing Electrostatic Shield Enabling Uniform Lithium Deposition in All-Solid-state Lithium Batteries

Suppression of lithium dendrites in all-solid-state lithium batteries by using a Janus-structured composite solid electrolyte

In-situ Formation of LiF-rich Composite Interlayer for Dendrite-Free All-Solid-state Lithium Batteries

Long-lifespan Thin Li Anode Achieved by Dead Li Rejuvenation and Li Dendrite Suppression for All-Solid-state Lithium Batteries

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Eliminating Li Dendrites in PEO-Based Polymer Solid Electrolytes by Doping with SbF<sub>3</sub>

Electrode structure enabling dendrite inhibition for high cycle stability quasi-solid-state lithium metal batteries

Armoring lithium metal anode with soft–rigid gradient interphase toward high-capacity and long-life all-solid-state battery

Artificial Single-Ion Conducting Polymer Solid Electrolyte Interphase Layer toward Highly Stable Lithium Anode

Solid‐State Electrolyte Design for Lithium Dendrite Suppression

Swallowing Lithium Dendrites in All‐Solid‐State Battery by Lithiation with Silicon Nanoparticles

Ether-containing Polycarbonate-Based Solid Polymer Electrolytes for Dendrite-Free Lithium Metal Batteries

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Rational Tuning of a Li 4 SiO 4 -Based Hybrid Interface with Unique Stepwise Prelithiation for Dendrite-Proof and High-Rate Lithium Anodes

In Situ Co-Growth Lif-Li3n Rich Dual-Protective Layers Enable High Interface Stability for Solid-State Lithium-Metal Batteries

Rationally Designed Poly(Propylene Carbonate)-Based Electrolyte for Dendrite-Free All Solid-State Lithium Metal Batteries

Self-Limiting Lithium Deposition Enabled by Synergistic Surface Chemical and Structural Engineering of Li Metal Anodes

Organic supramolecular protective layer with rearranged and defensive Li deposition for stable and dendrite-free lithium metal anode

Achieve Stable Lithium Metal Anode by Sulfurized-Polyacrylonitrile Modified Separator for High-Performance Lithium Batteries

Lithium Dendrite Inhibition Via 3D Porous Lithium Metal Anode Accompanied by Inherent SEI Layer