Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Damage and Failure in Carbon Fiber-Reinforced Epoxy Filament-Wound Shape Memory Polymer Composite Tubes under Compression Loading

Characterization of Failure Behavior in Unidirectional Fiber-Reinforced Polymer Via Off-Axis Compression on Small Block Specimens.

Study on the Mechanical Performances of Carbon Fiber/epoxy Composite Material Subjected to Dynamical Compression and High Temperature Loads

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Determination of the Material Model and Damage Parameters of a Carbon Fiber Reinforced Laminated Epoxy Composite for High Strain Rate Planar Compression

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

Compressive Failure Analysis of Unidirectional Carbon/epoxy Composite Based on Micro-Mechanical Models

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

EXPERIMENT AND LOAD-CARRYING CAPABILITY PREDICTION FOR J SHAPE STIFFENED COMPOSITE PLATE UNDER COMPRESSION

Simulation on Delamination Failure of Carbon Fiber Reinforced Epoxy Resin Composite Circular Tube under Axial Crushing

Failure Analysis of Carbon Fiber Reinforced Composite Subjected to Low Velocity Impact and Compression after Impact

Experimental Study on the Compressive Properties of A Kind of Carbon/Epoxy Composite

Damage and Failure of Laminated Carbon-Fiber-Reinforced Composite under Low-Velocity Impact

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Tensile Failure of Open-Hole Composite Laminates with Yarn Gaps: Experimental and Numerical Study

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings

Failure of short carbon-fiber-reinforced PEEK composites under high strain rate biaxial loading

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

A Micromechanical Model for Longitudinal Compressive Failure in Unidirectional Fiber Reinforced Composite