Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

A Thermal-Hydraulic-mechanical Coupling Model for Freezing Process Simulation of Cementitious Materials with Entrained Air Voids

Meso-scale mechanical model for mortar deformation under freeze thaw cycles

Numerical simulation of the freezing process of concrete

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

Numerical Investigation of the Effects of Freezing on Micro-Internal Damage and Macro-Mechanical Properties of Cement Pastes

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress

Trans-scale Multi-Physics Coupling Finite Element Model of Concrete During Freezing and Thawing

Multiscale freezing-thaw in concrete: A numerical study

A Study of the Behaviors of Cement-Based Materials Subject to Freezing

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

A Study Of Freezing Behavior Of Cementitious Materials By Poromechanical Approach

Coupled thermal-hydro-mechanical model of deep artificial freezing clay

Microstructure-based modeling of frost damage of saturated cement paste

A Novel Low-Temperature Thermo-Mechanical Coupling Model for Frost Cracking Simulation Using the Finite-Discrete Element Method

Finite element modeling of thermal‐hydro‐mechanical coupled processes in unsaturated freezing soils considering air‐water capillary pressure and cryosuction

Modeling on Coupled Heat and Moisture Transfer in Freezing Soil Using Mixture Theory

Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing

Mathematical Modeling and Analysis of Concrete Subjected to Freeze-Thaw Cycles

New insights into freezing behavior of saturated and air‐entrained porous media via a micromechanics‐based thermo‐hydro‐mechanical model