Abstract:To investigate the compressive behavior of concrete under a freeze-thaw environment, porosity swelling theory, a damaged plastic model, and an element removal technique are combined to propose a novel mesoscopic numerical model of concrete. The porosity swelling theory is employed to represent the pores evolution behavior of concrete under freeze-thaw cycles, and a novel calculation method for porosity expansion is presented to characterize freeze-thaw cycle times. The damaged plastic model is used to describe the tensile and compressive features of the mortar and interface transition zone. The element removal technique with maximum damage criterion is employed to implement crack propagation. It was demonstrated that the model could capture the freeze-thaw damage and compressive failure of concrete well. The uniaxial compressive behavior of five random mesonumerical models of freeze-thaw concrete was investigated. The results showed that freeze-thaw cycles can cause tensile damage to the mortar near pores and the spalling of surface mortar. With the increase of concrete freeze-thaw cycles, the dispersion degree of the compressive stress–strain curve gradually rises, and the peak stress and peak strain of the freeze-thaw concrete stress–strain curve decrease and increase, respectively. During the freeze-thaw cycles, the sustained preload will decrease the compressive strength because it causes the microcracks to accelerate the damage induced by the freeze-thaw cycles. Then, the influence of mortar and interface transition zone properties on the compressive strength of concrete under freeze-thaw cycles was analyzed. Under 100 freeze-thaw cycles, the maximum attenuation rates of concrete compressive strength increase by 9.39% and 34.26% with the increase of interface transition zone and mortar properties, respectively. Increasing mortar properties and decreasing the sustained preload will enhance the ability of concrete to resist freeze-thaw cycles.

Multiscale freezing-thaw in concrete: A numerical study

Numerical simulation of the freezing process of concrete

A Dynamic FEM-DEM Multiscale Modeling Approach for Concrete Structures

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Meso-scale mechanical model for mortar deformation under freeze thaw cycles

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Mathematical Modeling and Analysis of Concrete Subjected to Freeze-Thaw Cycles

Meso-Scale Failure of Freezing–Thawing Damage of Concrete under Uniaxial Compression

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Three-Dimensional Mesonumerical Model of Freeze-Thaw Concrete Based on the Porosity Swelling Theory

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

Fractal modelling of freeze-thaw in cold-region concrete: quantitative micro-network evolution and hydro-thermo-mechanical assessment

A Mesoscale Three-Dimensional Moisture Transport Model in Concrete

Micromechanical modeling of frozen concrete by micro-deformation of multi-phase composite material

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

Hydro-thermo-mechanical coupled peridynamic modeling of freeze–thaw fracture of concrete

Multiscale Thermoelastic Analysis of the Thermal Expansion Coefficient and of Microscopic Thermal Stresses of Mature Concrete