Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

Selecting Active Members to Drive the Mechanism Displacement of Tensegrities

Strength optimization analysis of tensegrity structure by shape adjustments under restricted displacements

Shape optimization analysis of tensegrity structure

Optimal displacement control of tensegrity structures based on linear programming

Minimal Mass Design of Active Tensegrity Structures

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

Multi-Stable Tensegrity Structures

Deployment of Tensegrities Subjected to Load-Carrying Stiffness Constraints

Selection of Active Elements for Morphing Tensegrities Based on Constructing Basis for Column Space of Sensitivity Matrix

Collision-Free Shape Control of A Plane Tensegrity Structure Using an Incremental Dynamic Relaxation Method and A Trial-And-Error Process

Nonlinear active control of tensegrity structures

The Equilibrium and Form-Finding of General Tensegrity Systems with Rigid Bodies

Finding Member Connectivities and Nodal Positions of Tensegrity Structures Based on Force Density Method and Mixed Integer Nonlinear Programming

A generalized objective function based on weight coefficient for topology-finding of tensegrity structures

A Unifying Framework for Form-Finding and Topology-Finding of Tensegrity Structures

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Form-Finding of Tensegrity Structures with Boundary Constraints Using Parallel Computation of Singular Value Decomposition

Tensegrity Structures with Buckling Members Explain Nonlinear Stiffening and Reversible Softening of Actin Networks

Topology Design of General Tensegrity with Rigid Bodies

Adaptive control to prevent transfer between bistable configurations of a tensegrity