Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

Strength and Deformability of a Low-Porosity Sandstone under True Triaxial Compression Conditions

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Shear Failure Mechanisms of Sandstone Subjected to Direct, True Triaxial and Confining Shear Test Conditions

Dynamic Mohr–Coulomb and Hoek–Brown strength criteria of sandstone at high strain rates

Experimental Investigation on the Strength, Deformability, Failure Behavior and Acoustic Emission Locations of Red Sandstone under Triaxial Compression

Dynamic Mechanical and Fracture Behaviour of Sandstone Under Multiaxial Loads Using a Triaxial Hopkinson Bar

Progressive damage and fracture behavior of brittle rock under multi-axial prestress constraint and cyclic impact load coupling

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

Dynamic Triaxial Compression Tests on Sandstone at High Strain Rates and Low Confining Pressures with Split Hopkinson Pressure Bar

Strength and energy exchange of deep sandstone under high hydraulic conditions

Influence of moisture content and intermediate principal stress on cracking behavior of sandstone subjected to true triaxial unloading conditions

Mechanical Deformation, Acoustic Emission Characteristics, and Microcrack Development in Porous Sandstone During the Brittle–Ductile Transition

Study on the influence of pore water pressure on shear mechanical properties and fracture surface morphology of sandstone

Influence of Intermediate Principal Stress on Mechanical and Failure Properties of Anisotropic Sandstone

Study on Brittleness Characteristics and Fracturing Crack Propagation Law of Deep Thin-Layer Tight Sandstone in Longdong, Changqing

Failure Behavior of Sandstone Specimens Containing a Single Flaw Under True Triaxial Compression

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Strength and Elastic Properties of Sandstone under Different Testing Conditions

Effect of Confining Pressure and Strain Rate on Mechanical Behaviors and Failure Characteristics of Sandstone Containing a Pre-existing Flaw