Abstract:The transcritical carbon dioxide vapor compression cycle is commonly used for heating and cooling applications because of the high discharge temperature and large evaporation heat. Whereas, high return water temperature is usually required by the heating demands, which significantly degrades the system performances. Nowadays, various kinds of subcooling methods have been proposed for the transcritical carbon dioxide vapor compression cycle, but a systematic comparative study based on the trade-off between the thermodynamic efficiency and economic cost is needed to analyze the applicability of these methods for large-scale district heating and cooling applications. In this work, the hot water temperature increases from 323.15 K to 343.15 K for district heating, and chilled water temperature reduces from 285.15 K to 280.15 K for district cooling. The simple single-stage transcritical carbon dioxide vapor compression cycles using subcooling methods with and without expansion work recovery, including internal heat exchanger, dedicated mechanical subcooling, cooling tower and dry cooler, are respectively modeled from the energetic, exergetic and economic perspectives. Based on the dual-objective Jaya algorithm and Technique for Order of Preference by Similarity to Ideal Solution decision-making method, the parametric study is conducted with optimized system performances to analyze the effects of different ambient conditions, namely the winter mode with ambient temperature from 248.15 K to 278.15 K and the summer mode with ambient temperature from 288.15 K to 318.15 K, and the relative humidity from 30% to 90%. Afterwards, the optimal subcooling methods under different ambient temperatures are selected based on the overall optimization and comparative study. The effects of different ambient temperatures on the system performances vary with different subcooling methods without expansion work recovery, and the dry cooler is the optimal subcooling method at the ambient temperatures from 248.15 K to 268.15 K, while the cooling tower is suggested under ambient temperatures higher than 278.15 K in spite of the performance degradation with high relative humidity. Insignificant differences of system performances using different subcooling methods can be observed with expansion work recovery, and the internal heat exchanger is selected as the optimal subcooling method for winter-mode operations, while the cooling tower is also suggested as the suitable subcooling method in the summer mode.

Investigation of the Impact Factors on the Optimal Intermediate Temperature in a Dual Transcritical CO2 System with a Dedicated Transcritical CO2 Subcooler

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Development and Validation of Helical-Coil-in-fluted-tube Gas Cooler for CO2 Heat Pump Water Heaters

Analysis of a Hybrid System of Liquid Desiccant and CO2 Transcritical Cycles

Preliminary Conceptual Exploration about Performance Improvement on Supercritical CO2 Power System Via Integrating with Different Absorption Power Generation Systems

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Study on the mechanism of the optimal discharge pressure for a transcritical CO 2 system

Simulation and Experimental Study of CO2 Transcritical Heat Pump System with Thermoelectric Subcooling

Thermodynamic Optimization of Heat Transfer Process in Thermal Systems Using CO2 As the Working Fluid Based on Temperature Glide Matching

Multi-objective optimization analysis of combined heating and cooling transcritical CO 2 system integrated with mechanical subcooling utilizing hydrocarbon mixture based on machine learning

Experimental Investigation on Refrigeration Performance of a CO2 System with Intermediate Cooling for Automobiles

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

The Coupled Process-Component Modeling and Optimization for Heat Exchanger of Supercritical CO2 with Property Variation Based on Heat Current Method

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling

Thermoeconomic Optimization and Comparison of the Simple Single-Stage Transcritical Carbon Dioxide Vapor Compression Cycle with Different Subcooling Methods for District Heating and Cooling

Subcooling effect on the optimal performance for a transcritical CO2 heat pump with cold thermal energy storage

Thermodynamic study of carbon dioxide transcritical refrigeration cycle with dedicated subcooling and cascade recooling

System Optimization of Co2 Heat Pump Water Heater Based on Economy

A Numerical Investigation on How to Efficiently Utilise Carbon Dioxide in Convection-Based Energy Systems

Thermodynamic Analysis of the Effect of Internal Heat Exchanger on the Dual‐ejector Transcritical CO 2 Cycle for Low‐temperature Refrigeration

Optimal compressor discharge pressure and performance characteristics of transcritical CO2 heat pump for crude oil heating