Abstract:Deformation kinking as an uncommon plastic deformation mechanism has been reported in several materials while the relevant microstructure evolution and grain refinement behavior at a large strain remain unclear so far. In this study, the issue was systematically investigated by utilizing cold forging to impose severe plastic deformation（SPD） on Ti-11 V metastable β-Ti alloys. It is found that the formation of kink bands experiences dislocation gliding, pre-kinking and the ripening of pre-kinks in sequences. The kink bands are subsequently thickened through the coalescence of multiple kink bands in a manner of high accommodation. Ordinary dislocation slip is developed as a dominant deformation mechanism when deformation kinking is exhausted. The resulting grain refinement involves transverse breakdown and longitudinal splitting of dislocation walls and cells, which fragment kink bands into small β-blocks. Further refinement of the β-blocks is still governed by dislocation activities, and finally nanograins with a diameter of ～15 nm are produced at a large strain of 1.2. Alternatively, it is revealed that nanocrystallization is highly localized inside kink bands while the outer microstructure maintains original coarse structures.Such localized refinement characterization is ascribed to the intrinsic soft nature of kink bands, shown as low hardness in nanoindentation testing. The intrinsic softening of kink bands is uncovered to originate from the inner degraded dislocation density evidenced by both experimental measurement and theoretical calculation. These findings enrich fundamental understanding of deformation kinking, and shed some light on exploring the deformation accommodation mechanisms for metal materials at large strains.

Kinking in a Refractory TiZrHfNb0.7 Medium-Entropy Alloy

Deformation Kinking and Highly Localized Nanocrystallization in Metastable Β-Ti Alloys Using Cold Forging

Quasi in-situ investigation on kinking behavior of Fe-Cr-Al alloy during thermal compression

A novel deformation mechanism in Ti-V binary metastable β-Ti alloys: Deformation kinking promoted by dislocation accumulation

Kinking-facilitated Nano-Crystallization in a Shock Compressed Mg-1Zn Alloy

New kink-band formation mechanism discovered in Zn-Al alloy with mille-feuille microstructure

Dislocation Glide and Mechanical Twinning in a Ductile VNbTi Medium Entropy Alloy

Kinking-facilitated nano-crystallization in a shock compressed Mg-1 Zn alloy

Kwinking as the plastic forming mechanism of B19' NiTi martensite

Insights into orientation-dependent plasticity deformation of HfNbTaTiZr refractory high entropy alloy: An atomistic investigation

Dynamic Deformation Behaviors and Structure Evolution of TiZrHf Hexagonal Closed-Packed Medium-Entropy Alloy

Interrupted in-situ EBSD study of crystallographic characteristics and deformation micro-mechanism in TiZrHfNbx refractory high entropy alloys during uniaxial tensile deformation

Kink Structures Induced in Nickel-Based Single Crystal Superalloys by High-Z Element Migration

Plastic Deformation Behavior of Pre-Twinned CoCrFeNi High Entropy Alloy under Quasi-Static and Dynamic Deformation

Probing deformation behavior of a refractory high-entropy alloy using in situ neutron diffraction

Deformation mechanism of dislocation slip and kinking behaviour in dynamic compression response of TiZrHfNb alloy fabricated by laser directed energy deposition

Spinodal decomposition induced brittleness of Zr-Ta containing medium-entropy alloys

Lamellar kinking in primary hot working of titanium alloy: Cross-scale behavior and mechanism

In-situ Twin-wire Additive Manufacturing: Integrated Fabrication of Refractory Medium Entropy Alloy, Correlation Between Orientation and Slip Systems Activation

Ab-initio study of the structural, elastic and dislocation properties of body-centered cubic refractory HfNbTaTiZr high entropy alloy

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature