Abstract:β titanium alloys with bi-modal structure which exhibit improved strength-ductility combination and fatigue property are widely used in aviation and aerospace industry. However, owing to the small size of primary α (αp) and nano-scaled multi variant distribution of secondary α platelets (αs), investigating the deformation behavior is really a challenging work. In this work, by applying transmission electron microscopy (TEM), the slip behavior in αp and transformed β matrix with different tensile strain was studied. After α/β solution treatment, the initial dislocation slips on {110} plane with <1 1¯ 1> direction in β matrix. During further deformation, (110), (101) and (1 1¯ 2) multi slip is generated which shows a long straight crossing configuration. Dislocation cell is exhibited in β matrix at tensile strain above 20 %. Different from the solid solution treated sample, high density wavy dislocations are generated in transformed β matrix. High fraction fine αs hinders dislocation motion in β matrix effectively which in turn dominates the strength of the alloy. In primary α phase (αp), a core-shell structure is formed during deformation. Both pyramidal a + c slip and prismatic/basal a slip are generated in the shell layer. In core region, plastic deformation is governed by prismatic/basal a slip. Formation of the core-shell structure is the physical origin of the improved ductility. On one hand, the work hardening layer (shell) improves the strength of αp, which could deform compatibly with the hard transformed β matrix. Meanwhile, the center area (core) deforms homogeneously which will sustain plastic strain effectively and increase the ductility. This paper studies the slip behavior and reveals the origin of the improved strength-ductility combination in Bi-modal structure on a microscopic way, which will give theoretical advises for developing the next generation high strength β titanium alloys.

A novel deformation mechanism in Ti-V binary metastable β-Ti alloys: Deformation kinking promoted by dislocation accumulation

Deformation Kinking and Highly Localized Nanocrystallization in Metastable Β-Ti Alloys Using Cold Forging

Kink band induced β→α phase transformation in lamellar α+β Ti alloys

Twinning and Sequential Kinking in Lamellar Ti-6Al-4V Alloy

Lamellar kinking in primary hot working of titanium alloy: Cross-scale behavior and mechanism

Novel deformation twinning system in a cold rolled high-strength metastable- Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy

Deformation Mechanisms in a Β-Quenched Ti-5321 Alloy: In-situ Investigation Related to Slip Activity, Orientation Evolution and Stress Induced Martensite

Crystallography and microstructure of the deformation bands formed in a metastable β titanium alloy during isothermal compression

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

A review on deformation mechanisms of metastable β titanium alloys

A new mechanism of lamellar kinking produced by α twins

Deformation twinning-induced single-variant ω-plates in metastable β-Ti alloys containing athermal ω-precipitates

Kink-mediated High Strength and Large Ductility Via Nanocrystallization in a Tough Titanium Alloy

Multiple Deformation Mechanisms in Adiabatic Shear Bands of a Titanium Alloy during High Strain Rate Deformation

The Microstructures and Deformation Mechanism of Hetero-Structured Pure Ti under High Strain Rates

Kinking in a Refractory TiZrHfNb0.7 Medium-Entropy Alloy

Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable β-Ti Alloy

Slip Behavior of Bi-modal Structure in a Metastable Β Titanium Alloy During Tensile Deformation

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Reversion martensitic phase transformation induced {3 3 2}〈1 1 3〉 twinning in metastable β-Ti alloys

Deformation defects in a metastable β titanium alloy