Abstract:In this study, we explore the evolution of martensitic structures during deformation and their correlation with solution temperature in a metastable β-type Ti–10V–2Fe–3Al alloy. After a solution treatment at 760 °C, microstructures consist of equiaxed β grains and primary α particles. Increasing the solution temperature to 780 °C minimally affects equiaxed β grain size (~4.1–4.7 μm) but significantly reduces the α phase volume fraction. The α particles become scarce and completely absent following solution treatments at 800 and 820 °C, where the β grain size grows to ~109.1 and ~151.3 μm, respectively. Thermally-induced martensite (TIM) α′′ laths are formed in specimens solution-treated at 770 °C or higher, predominantly populating the β grains of the specific specimens solution-treated at 800 and 820 °C. All solution-treated specimens exhibit a double yielding phenomenon. For specimens solution-treated at 760–780 °C, this results primarily from the stress-induced martensitic transformation (SIMT) process, while for those solution-treated at 800 and 820 °C, it mainly arises from the martensite reorientation (MR) process. The triggering stress for the SIMT/MR process increases with increasing solution temperature. In early deformation stages, TIM α′′ laths initially undergo the MR process, transforming into a favored α′′ variant, and the SIMT process can occur concurrently. As deformation progresses, the α′′ phase changes orientation continuously through deformation twinning, transforming into the favored α′′ variant dictated by the evolving stress conditions. This study provides insights into martensitic structure evolution and its influence on mechanical properties in metastable β titanium alloys.

Reversion martensitic phase transformation induced {3 3 2}〈1 1 3〉 twinning in metastable β-Ti alloys

Stress-induced α′′ martensitic phase transformation and martensitic twinning in a metastable β titanium alloy

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Twinning behavior of orthorhombic-α" martensite in a Ti-7.5Mo alloy

Phase transformation induced twinning in commercially pure titanium: An in-situ study

Novel deformation twinning system in a cold rolled high-strength metastable- Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy

Twinning-induced Plasticity Mechanism of a?-martensitic Titanium Alloy

Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable β-Ti Alloy

The Role of High-Index Twinning on Hierarchical Α Microstructure in a Metastable Β Ti-5Al-5Mo-5V-3Cr Alloy

The Role of Nano-Scaled Structural Non-Uniformities on Deformation Twinning and Stress-Induced Transformation in a Cold Rolled Multifunctional Β-Titanium Alloy

Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy

Cyclic deformation response and strain-induced martensitic transformation of β single phase Ti-35421 alloy

The role of thermal cycling on twinning in metastable beta-Ti alloy

Martensitic structure evolution during deformation and its correlation with solution temperature in metastable β titanium alloys

Exploration of Nano-scale Structural Instabilities in Metastable Β Titanium Alloys Using Advanced Electron Microscopy

Introducing transformation twins in titanium alloys: an evolution of α-variants during additive manufacturing

Phase transformation generating coherent twin boundaries in titanium alloys

Deformation mechanisms of a novel multiphase Zr–30Ti–7Nb–4Sn alloy consisting of β, α′ and α′′ phases

Deformation twinning-induced single-variant ω-plates in metastable β-Ti alloys containing athermal ω-precipitates

The Role of Nano-domains in {1–011} Twinned Martensite in Metastable Titanium Alloys

Kink band induced β→α phase transformation in lamellar α+β Ti alloys