Abstract:The inverted perovskite solar cells (PSCs) are gaining increasing attention recently for their unprecedented advantages, such as better integration with tandem and flexible designs, negligible hysteresis, good operational stability, and compatibility with commercially scalable fabrication approaches. Nickel oxide (NiOx) films prepared by magnetron sputtering technology exhibit excellent scalability and reproducibility, which could well meet the requirements of the large-scale production of inverted PSCs. However, NiOx prepared by vacuum methods generally has fewer surface hydroxyl groups, deteriorating the wettability and damaging the interface contact with the perovskite. Particularly, the Ni3+ defects on the NiOx surface could lead to unfavorable redox reactions with organic cations in the perovskite under high temperatures, promoting the rapid degradation of the perovskite. Thus, surface regulation of sputtered NiOx is imperative for high-performance PSCs. Herein, 4-(trifluoromethyl) phenylcarbamate hydrochloride (TFFA) was used to regulate the surface properties of sputtered NiOx. The strongly electronegative F ions in TFFA passivated the Ni3+ defects on the NiOx surface, suppressed unfavorable interface reactions, and improved charge recombination. The polar ammonium functional group was used to adjust the surface energy of NiOx, thereby improving the wettability and optimizing the crystallization kinetics of the perovskite. As a result, the power conversion efficiency (PCE) of PSCs reached 22.76%, which was among the highest PCEs reported for sputtered NiOx-based inverted PSCs to date. Moreover, the unencapsulated target devices exhibited better stability, maintaining over 85% of the initial PCE after aging for approximately 1200 h in a N2 environment. Our achievements pointed out a practical strategy for enhancing the performance of sputtered NiOx-based inverted PSCs, which could potentially accelerate the development and application of large-area PSCs.

Nh4f As An Interfacial Modifier For High Performance Niox -Based Inverted Perovskite Solar Cells

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells

A buried interface modification strategy for enhancing the photovoltaic performance of NiOx-based inverted perovskite solar cells

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

Design of NiO<i><sub>x</sub></i>/Carbon Heterostructure Interlayer to Improve Hole Extraction Efficiency of Inverted Perovskite Solar Cells

Design of NiO x /Carbon Heterostructure Interlayer to Improve Hole Extraction Efficiency of Inverted Perovskite Solar Cells

4-Tert-butylpyridine Induced Ni3+/Ni2+ Ratio Modulation in NiOx Hole Transport Layer Towards Efficient and Stable Inverted Perovskite Solar Cells

Construction of Charge Transport Channels at the NiOx/Perovskite Interface through Moderate Dipoles toward Highly Efficient Inverted Solar Cells

Spontaneous decoration of ionic compound at the perovskite interfaces to achieve 23.38% efficiency with 85% fill factor in NiOX-based perovskite solar cells

Fluorinated Interlayer Modulation of NiOx-Based Inverted Perovskite Solar Cells

Modification of Nickel Oxide via Self-Assembled Monolayer for Enhanced Performance of Air-Processed FAPbl 3 Perovskite Solar Cells

Enhancing Hole Transport Uniformity for Efficient Inverted Perovskite Solar Cells Through Optimizing Buried Interface Contacts and Suppressing Interface Recombination.

Sputtered Niox Films As Hole Transport Layers for FA-Based Perovskite Solar Cell Application

Organic Salt Buffer Layer Enables High‐Performance NiOx‐Based Inverted Perovskite Solar Cells

Efficient Energy Level Modulation via Electrophilic KBF4 for High-Performance Inverted Planar Perovskite Solar Cells with Superior Stability

4-tert-butylpyridine induced Ni3+/Ni2+ ratio modulation in NiO hole transport layer towards efficient and stable inverted perovskite solar cells

Nitrogen‐Doped Nickel Oxide As Hole Transport Layer for High‐Efficiency Inverted Planar Perovskite Solar Cells

Spontaneous decoration of ionic compounds at perovskite interfaces to achieve 23.38% efficiency with 85% fill factor in NiOX-based perovskite solar cells

Efficient NiOx Hole Transporting Layer Obtained by the Oxidation of Metal Nickel Film for Perovskite Solar Cells

Surface Property Regulation of a Magnetron-Sputtered NiOx Hole Transport Layer for High-Performance Inverted Perovskite Solar Cells