Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

Multiparameter Modeling of Piezoelectric Six-Degree-of-Freedom Accelerometer about Sensitivity Characteristics

Dynamic Characteristics Analysis of Piezoelectric Six-Degree-of-Freedom Accelerometer 1

Analytical modeling of piezoelectric 6-degree-of-freedom accelerometer about cross-coupling degree

Principle Research on a Single Mass Six-Degree-of-Freedom Accelerometer with Six Groups of Piezoelectric Sensing Elements

Analytical Mathematical Model of Piezoelectric 6-D Accelerometer About Amplitude-Frequency Characteristics

Principle Research On A Single Mass Piezoelectric Six-Degrees-Of-Freedom Accelerometer

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer

A novel design of parallel piezoelectric six-degree-of-freedom accelerometer

Principle and characteristics of the rapid prototype of a piezoelectric six degree-of-freedom accelerometer

A Mathematical Model Of A Piezo-Resistive Eight-Beam Three-Axis Accelerometer With Simulation And Experimental Validation

Active Design Method for the Static Characteristics of a Piezoelectric Six-Axis Force/Torque Sensor

Active design method for the static characteristics of a piezoelectric six-axis force/torque sensor.

Design of a Triaxial Piezoelectric Accelerometer

Study on the Influence of Structural Parameters of Multi-Dimensional Force Sensor on Test Sensitivity

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Principle Research on a Novel Piezoelectric 12-DOF Force/Acceleration Sensor.

Design and Simulation of Capacitive, Piezoresistive and Piezoelectric Triaxial Accelerometers Using a Highly Symmetrical Quad-Beam Structure

Dynamic Characteristic Analysis of Planar Piezoelectric Six-Axis Force/Torque Sensor

A Novel Piezoresistive Accelerometer with SPBs to Improve the Tradeoff Between the Sensitivity and the Resonant Frequency

Design and Simulation of A Novel Highly Symmetrical Piezoelectric Triaxial Accelerometer