Abstract:The pipelined-SAR ADC has become popular in wide-bandwidth and high-resolution applications due to its power-efficient architecture [1]. In the pursuit of higher ADC speeds while maintaining precision and power efficiency, not only does the conversion time of the SAR sub-ADC need to be shortened, but also the speed and gain of residue amplifiers (RA) need to be enhanced. Conventional solutions to these two problems, including reducing the bit-cycling time of the SAR and increasing the RA bandwidth, often require extensive power costs, leading to a degraded power efficiency. To address the speed and gain challenges, three techniques are proposed in this work. First, a continuous-time SAR-assisted detect-and-skip (CTDAS) to parallelize the MSB conversion with ADC sampling, thus cutting down the $1^{\text{st}}$-stage sampling and conversion time by 35% when compared with a conventional detect-and-skip (DAS) technique. Second, an open-then-close correlated level shifting (OCCLS) technique applied in the residue amplifier, which significantly speeds up the first phase by open-loop amplification reusing the first two high-bandwidth stages of the RA. With the aid of a detect-and-cut loop, an optimal voltage gain in the first phase is obtained across PVT variations, thus realizing an >80dB equivalent RA open-loop gain $\left(\mathrm{A}_{\mathrm{EO}}\right)$ across PVT variations. Third, a hybrid static-floating ringamp architecture is implemented to improve the noise performance of the RA and to fit in well with the OCCLS scheme. Thanks to the techniques above, the 22nm prototype achieves 70.7dB SNDR under 200MS/s while consuming 2.0mW from a 0.9V supply. It measures a best energy efficiency of 177.7dB Schreier FoM with fs >150MS/s.

A Pipeline SAR ADC with Second-Order Interstage Gain Error Shaping

A 75.8dB-SNDR Pipeline SAR ADC with 2<sup>nd</sup>-order Interstage Gain Error Shaping

A 77.1-dB-SNDR 6.25-MHz-BW Pipeline SAR ADC With Enhanced Interstage Gain Error Shaping and Quantization Noise Shaping

A 77.1-dB 6.25-MHz-BW Pipeline SAR ADC with Enhanced Interstage Gain Error Shaping and Quantization Error Shaping

A 2Nd-Order Noise-Shaping SAR-Assisted Pipeline ADC with Order-Boosted Gain-Error-Shaping

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 20 MHz Bandwidth 79 Db SNDR SAR-Assisted Noise-Shaping Pipeline ADC with Gain and Offset Calibrations

A 12-Bit 110ms/s 4-Stage Single-Opamp Pipelined SAR ADC with Ratio-Based GEC Technique

An 871 Nw 96.2 Db SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier

A 12-Bit 1.5-Gs/s Single-Channel Pipelined SAR ADC with a Pipelined Residue Amplification Stage

9.1 A 2mW 70.7dB SNDR 200MS/s Pipelined-SAR ADC with Continuous-Time SAR-Assisted Detect-and-Skip and Open-then-Close Correlated Level Shifting.

A 800 MS/s, 12-Bit, Ringamp-Based SAR Assisted Pipeline ADC with Gain Error Cancellation

A 13-Bit 312.5-Ms/s Pipelined SAR ADC with Integrator-type Residue Amplifier and Inter-stage Gain Stabilization Technique

A 12-bit 100-MSps pipelined-SAR ADC with a time-interleaved second-stage

A 13-Bit 312.5-Ms/s Pipelined SAR ADC with Open-Loop Integrator-Based Residue Amplifier and Gain-Stabilized Integration Time Generation

A 10b 1.25GS/s Residue Post-Amplified Pipelined-SAR ADC with Supply-and-Temperature Stabilized Open-Loop Residue Amplifier.

9.3 A 40Khz-Bw 90Db-Sndr Noise-Shaping SAR with 4× Passive Gain and 2Nd-Order Mismatch Error Shaping

A 1.5-MHz BW 81.2-dB SNDR Dual-Residue Pipeline ADC With a Fully Dynamic Noise-Shaping Interpolating-SAR ADC