Abstract:Given their advantage of suppressing grating lobes, randomly arranged linear arrays have potential for use in ultrasonic treatment. The current work proposes a method based on genetic algorithm to optimize the random arrangement of array elements, so that the suppression effect of grating lobes can be significantly improved with reduced calculating time. The maximum and average kerfs of array elements are used as genes, and the ratio of the maximum to the secondary maximum sound pressure at the focal plane is used as the optimized target. Typically, the calculation requirements of the current method can be reduced to ~ 25% of the traversing method. We further discuss how the kerf width, the effective ratio of element areas and the ratio of focal distance to array aperture affect the suppression of grating lobes. For a typical linear array with 32 elements (1-MHz operating frequency, 1.5-mm element width and 150-mm focal distance), the results suggest that the grating lobes are suppressed well when (1) the ratio of maximum width to average width of the element is between 5 and 8, (2) the ratio of the effective element area to the area of the whole array is between 0.5 and 0.9, and (3) the ratio of the effective emission aperture to the actual emission aperture of the array is as large as possible. Based on optimized parameters, an experimental array was fabricated and the measured results of corresponding sound field were entirely consistent with the simulated results (Given her role as an Associate Editor of this journal, Juan Tu had no involvement in the peer-review of articles for which she was an author and had no access to information regarding the peer-review. Full responsibility for the peer-review process for this article was delegated to another Editor of this journal.).

Simulation Model of Ultrasonic Array Acoustic Field for Particle Manipulation

Modelling And Simulation Of Phased Array Transducers Base On Advanced Ut Techniques

Auto-tuning Numerical Method for Acoustic Wave Simulation Using Analytical Solution

Comparison of Phase Optimization Algorithms for Particle Manipulation Via Acoustic Tweezer

Compound Manipulation of Micro-Particles Using a Single Device:Ultrasonic Trapping, Transporting, and Rotating

Inter-Particle Effects with a Large Population in Acoustofluidics

A New Hybrid Equivalent Modeling Method of Low-Frequency Radiation Source Based on GS and JADE Algorithms and Phaseless Near-Field Data

Research on the Non-Contact Manipulation of Biomaterials in the Stationary Sound Field of Ultrasonic Transducers

The simulation of acoustic field in the design of ultrasound driving device for site nano-drug delivery

An Improved Genetic Algorithm for Thinning Acoustic Array.

Experimental research on the horizontally getting together behaviors of acoustically manipulated bi-particle

Learning-based acoustic displacement field modeling and micro-particle control

Formation Simulation for Multi-point Array Based on Ultrasonic Standing Wave

Review of Ultrasonic Particle Manipulation Techniques: Applications and Research Advances

Bisymmetric Coherent Acoustic Tweezers Based on Modulation of Surface Acoustic Waves for Dynamic and Reconfigurable Cluster Manipulation of Particles and Cells

Optimization of a Random Linear Ultrasonic Therapeutic Array Based on a Genetic Algorithm.

Performance and Robustness Improvements in Ultrasonic Transportation Against Large-Scale Streaming

Effect of the Acoustic Field Geometric Parameters on Planar Array Acoustic Levitator

Dynamic Properties of Micro-Particles in Ultrasonic Transportation Using Phase-Controllable Standing Waves

Simulation of Particle Transportation Trajectory in Acoustic Standing Wave Field

Focused Beam Control for Ultrasound Surgery with Spherical-Section Phased Array: Sound Field Calculation and Genetic Optimization Algorithm.