Abstract:The centrifugal compressor is widely used for gas compression in various industrial fields such as aero-engine, gas turbine and turbocharger. However, the stable operating range is usually restricted by the occurrence of flow instability such as stall and surge. The paper experimentally examines the developing process of surge and stall occurring in a centrifugal compressor to advance the understanding on flow mechanism of flow instability. It is found that three types of pressure fluctuation can be observed at low flowrate region. At the critical point, the local stall firstly occurs in some specific diffuser passages and the enlarged local diffuser stall eventually induces the mild surge of compression system indicated by the sinusoidal pressure fluctuation. At lower mass flow rate, the diffuser stall cell begins to circumferentially propagate along the impeller rotating direction at 11% of rotor speed with the existence of mild surge. In comparative analysis of IGV pre-swirl angle on the occurrence of mild surge, the mild surge still occurs at the operating condition when the slope of the characteristic map of test stage is still obviously negative, in which the compression system is supposed to be stable in previous study. And a new suggested criterion for the prediction of mild surge is demonstrated that the occurrence of mild surge depends on the destabi-lization effect of downstream components about diffuser and volute. Combined with the experimental data, the streamwise distribution characteristic of diffuser stall can be used to develop the simplified model of lumped parameters for the analysis on the generation mechanism of the diffuser rotating stall. The quantitative investigation on the relation between the pressure-rise characteristic of subcomponents and the occurrence of mild surge and diffuser rotating stall not only advances the prediction of stability limit but also lays the theoretic foundation for controlling these unsteady behaviors to improve the operating range.

Dynamic Characteristics of a Swing Compressor for an Air Conditioning System at Different Discharge Pressures

Investigation of Dynamic Characteristics and Power Consumption of the Swing Compressor with No Valves

Dynamic Performance of Reciprocating Compressor with Capacity Regulation System

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Structural Study on a Swing Compressor with No Valves for Air Conditioning Systems

Experimental study of the swing compressor with two discharge channels for household air-conditioner applications

Design and Dynamic Analysis of a Novel Double-Swing Vane Compressor for Electric Vehicle Air Conditioning Systems

Numerical Investigation on Indicated Power and Discharge Process of Three Different Discharge Methods of Swing Compressor

Theoretical Study on Frictional Losses of A Novel Automotive Swing Vane Compressor

Dynamic behavior analysis of a moving coil oil-free linear compressor in refrigeration system

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Investigation of Discharge Valve in Ultra-High-speed Rotary Compressors: an Experimental and FSI Simulation-Based Study

Experimental investigation and numerical simulation on the hysteresis zone of a variable displacement wobble plate compressor

Investigation of characteristics of discharge pressure pulsation in a twin-screw refrigeration compressor

Force assisted discharge valve for piston compressors

Performance Investigation of a Pressure Pulsation Dampener Applied in the Discharge Chamber of a Twin Screw Refrigeration Compressor

Experimental Investigation of the Discharge Valve Dynamics in a Reciprocating Compressor for Trans-Critical CO2 Refrigeration Cycle

Investigation of Flow Behaviour and Heat Rejection for an Air-Cooled Small Multi-Stage Swash-Plate Compressor

Study on Leakage Loss Via the Radial Clearance in a Double-Swing Vane Compressor for Electric Vehicle Air Conditioning Systems

Research on the transient dynamic characteristics of the low-density polyethylene compressors shaft system with operating pressure exceeding 180 MPa