Abstract:Fluorescent sensing microspheres based on perhaps the most selective and practically useful chloride ionophore known, the recently reported [9]mercuracarborand-3 (MC-3), have been prepared and optimized for physiological measurements. In initial work, this ionophore was shown to yield functional optical sensing films in combination with an electrically neutral chromoionophore, ETH 5418. Unfortunately, however, these optodes suffered from unacceptably high levels of sodium interference under physiological conditions. To better understand the sensing mechanism, optical and potentiometric binding experiments were used to characterize the stoichiometry and the complex formation constants for this ionophore. It was found that the preferred stoichiometry is 1:2, rather than 1:1 as assumed earlier. The 1:2 complex is extremely stable (log beta(2) = 13.4), but a relatively strong 1: 1 complex also exists (log K-1 = 9.9). These characteristics were used to fabricate chloride optodes that make use of the stepwise ion-ionophore decomplexation equilibrium, by adding a calculated amount of lipophilic anion exchanger to the polymer film. Such optodes showed dramatically reduced sodium interference while maintaining the excellent selectivity of the traditional formulation. The optimized composition also shifted the measuring range to physiological conditions, making them useful for the assessment of chloride in undiluted and 10-fold-diluted blood at pH 7.4. After necessary alterations of the particle preparation procedure and sensor formulation, the new insights were used to fabricate mass-produced optical sensing microspheres with characteristics essentially identical to those of the optode sensing films.

Tripodal Squaramide Derivative As a Neutral Chloride Ionophore for Whole Blood and Sweat Chloride Measurement

Squaramide-based tripodal ionophores for potentiometric sulfate-selective sensors with high selectivity.

Smartphone-based Battery-Free and Flexible Electrochemical Patch for Calcium and Chloride Ions Detections in Biofluids

Protoporphyrin IX Based All-Solid-State Ion-Selective Electrodes for Choline Determination In Vitro

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

Trihexyltetradecylphosphonium Chloride Based Ratiometric Fluorescent Nanosensors for Multiplex Anion Discrimination

Colorimetric and fluorescent turn-on detection of chloride ions with ionophore and BODIPY: Evaluation with nanospheres and cellulose paper

Colorimetric Detection of Electrolyte Ions in Blood Based on Biphasic Microdroplet Extraction

A fully screen-printed potentiometric chloride ion sensor employing a hydrogel-based touchpad for simple and non-invasive daily electrolyte analysis

A single-nanozyme colorimetric array based on target-induced differential surface passivation for quantification and discrimination of Cl−, Br− and I− ions

In vivo dynamic tracking of cerebral chloride regulation using molecularly tailored liquid/liquid interfacial ultramicro iontronics

Mechanistic insights into the development of optical chloride sensors based on the [9]mercuracarborand-3 ionophore.

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold II: Urea Based Tripodal Ionophores for Polymeric Membrane Nitrate Selective Electrodes

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes

A multichannel electrochemical all-solid-state wearable potentiometric sensor for real-time sweat ion monitoring

Halide Ions Sensing in Water Via Silver Nanoprism Self-Assembled Chips

Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat

Electrochemical detection of chloride at the multilayer nano-silver modified indium-tin oxide thin electrodes

Electrical Double Layer-Based Iontronic Sensor for Detection of Electrolytes Concentration

Squaramide-based tripodal receptors for selective recognition of sulfate anion.

Colorimetric sensing of chloride in sweat based on fluorescence wavelength shift via halide exchange of CsPbBr3 perovskite nanocrystals