Abstract:The motivation to design a more efficient and compact aircraft engine leads to a continuous increase in overall pressure ratio and decrease in the stage number in compressors. Compared to the traditional multi-stage compressor, a single-stage ultra-high-pressure-ratio centrifugal compressor with a pressure ratio higher than 10.0 can significantly improve the engine’s power-to-weight ratio and fuel economy with a reduced structure complexity. Thus, it has great potential to be adopted in the compression system of advanced aero engines, such as turboshaft engines, in the future. However, the highly narrow Stable Flow Range (SFR) of ultra-high-pressure-ratio centrifugal compressors is a severe restriction for engineering applications. This research focuses on the aerodynamic performance of a ultra-high-pressure-ratio centrifugal compressor, and three-dimensional simulation is employed to investigate the effect of Self-Recirculating Casing Treatment (SRCT) on the performance and stability of the centrifugal compressor. Firstly, the parametric model of SRCT is established to investigate the effect of geometry parameters (rear slot distance and rear slot width) on the aerodynamic performance of the centrifugal compressor. It is concluded that SRCT improves the compressor’s SFR but deteriorates its efficiency. Also, a non-linear and non-monotone relationship exists between the SFR and rear slot distance or width. Then, the flow mechanism behind the effect of SRCT is explored in detail. By introducing the SRCT, an additional flow path is provided across the blade along the circumferential direction, and the behavior of the shock wave and tip leakage flow is significantly changed, resulting in the obviously different loading distribution along the streamwise direction. As a result, the mixing and flow separation loss are enhanced in the impeller flow passage to deteriorate the efficiency. On the other hand, the blockage effect caused by the mixing of slot recirculation and mainstream flow near the impeller inlet increases the axial velocity and reduces the incidence angle below the 90% spanwise section, which is considered to effectively stabilize the impeller flow field and enhance the stability.

The Influence of Diversified Forward Sweep Heights on Operating Range and Performance of an Ultra-High-load Low-Reaction Transonic Compressor Rotor

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Numerical investigation of lfow ifeld for transonic centrifugal compressor with blade leading edge forward sweep

Effect of Self-Recirculating Casing Treatment on the Aerodynamic Performance of Ultra-High-Pressure-Ratio Centrifugal Compressors

Mechanisms of Sweep on the Performance of Transonic Centrifugal Compressor Impellers

Investigation on the Aerodynamic Performance and Flow Mechanism of Transonic Ultra-Highly Loaded Tandem-Rotor Stage

Design and Performance Analysis of a Two-Stage Transonic Low-Reaction Counter-Rotating Aspirated Fan/compressor with Inlet Counter-Swirl

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Study on the Influence of Different Slot Sizes on the Flow Field of Transonic Compressor Rotors

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Effects of Circumferentially Non-Uniform Clearance on the Spanwise Flow Characteristics in a Transonic Compressor Rotor

Influence of Splitter Blades on the Performance of a Single-Stage Centrifugal Compressor with Pressure Ratio 12.0

Investigation on the Interaction of Tip Leakage Flow/ Shock Wave/ Boundary Layer in a Transonic Compressor Stage

Effect of leading edge swept on low specific speed centrifugal compressor performance

Influence of backward-facing step (BFS) on three-dimensional flow behavior in transonic compressor cascade

Passage shock wave/boundary layer interaction control for transonic compressors using bumps

Assessment of advanced RANS turbulence models for prediction of complex flows in compressors

Unsteady near-stall flow mechanisms in a transonic compressor rotor at different rotating speeds