Numerical investigation of lfow ifeld for transonic centrifugal compressor with blade leading edge forward sweep

Yanming LIU,Qing CUI,Xinqian ZHENG,Longkai GUO

DOI: https://doi.org/10.3969/j.issn.1674-8484.2015.04.013

2015-01-01

Abstract:Three turbo-charged transonic centrifugal compressors were designed with different forward-swept angles (10°, 15°, 20°) of blade leading edge by means of the commercial software Concepts NREC. Numerical simulation and comparative analysis were conducted to investigate the inlfuence of blade leading edge forward sweep on the lfow ifeld characteristics in the compressors. The results show that the compressors with forward-swept main blade possess certain advantages in lfow capacity and stal margin over unswept compressor, the scheme of 15° has the largest lfow capacity, and the scheme of 20° has the biggest stal margin. As forward-swept angle increases from 0°to 20°, the passage shock strength decreases 7.2% under the choke condition, while decreases 3.4% under the peak efifciency condition; the range and strength of low-energy lfow mass in impeler channel are improved in some degree. The scheme of 10° is the optimal scheme among the 3 different forward-swept blades with the compressor efifciency increasing by 0.72% and pressure ratio increasing by 0.62%.