Abstract:Because of its extreme hardness, wear resistance, good thermal conductivity and low thermal expansion coefficients, a diamond tool exhibits a range of properties which makes it a key and unique component in many fields of mechanical engineering. In comparison with the other types of diamond tools, the thin film diamond-coated cutting inserts have great potentialities in the commercial application because of its low costs for fabrication equipment and high performance. Thus, they are on the verge of becoming the next generation of tools used for high speed machining non-ferrous metals and alloys, metal-compound materials, and hard brittle non-metals. However, the poor adhesion of the diamond film on the substrate becomes the main technical barriers for the successful development and commercialization of diamond-coated tools. In this paper, diamond thin films were deposited on WC-Co cemented carbide substrates by the electron aided hot filament chemical vapor deposition (EACVD), using a mixture of hydrogen and acetone as source gases. A new multiple chemical pre-treatment including microwave oxidation, reaction in alkaline solution and cleaning by ultrasonic treatment in acid solution has been performed for free shape cemented WC-Co drills in order to increase the diamond nucleation and to enhance the coating adhesion. And also, another new pretreatment method using Ar-HZ gas etching decarburization by microwave plasma is performed for the WC-Co substrate surface. The influences of this pretreatment technique on the adhesion strength, diamond nucleation and surface morphology of the diamond thin film are investigated. Scanning electron microscope (SEM) was used to view the substrate morphology, and to examine the cobalt removal. After pre-treatment, the surface of the WC-Co substrate becomes slightly rough, but its composition and structure shows no changes identified by X-ray diffraction (XRD). Scanning electron microscope (SEM) indicates a distribution of uniform micro-roughness WC grains on substrate surface. And also the research results show that the pretreatment using Ar-H etching decarburization by microwave plasma is an effective method to enhance adhesive strength. The appropriate CVD processes were studied for the fabrication of tools with complex geometries. An adequate amount of additive can effectively prevent the overflow of Co from inner to surface of the substrate and avoid the catalytic effect of Co during CVD. The smooth diamond film with low surface roughness can be deposited by increasing the carbon source concentration and reducing the reactive pressure at the later stage of CVD process. The diamond morphology quality and homogeneity of coatings were characterized by SEM and Raman spectroscopy. The cutting performances of diamond-coated tools were studied by the cutting tests of difficult-to-machine materials. The research results show that the high quality diamond coating has been deposited on complex shape substrates for WC-Co cemented carbide twist drills. The cutting performances of diamond-coated drills are improved further by the new pretreatment and CVD process. It is of great significance for the fabrication and application of the diamond-coated tools with complex geometries.

Preparation of Cemented Carbide Diamond Films by Gaseous Boronizing Pretreatment Combines with Self-Assembly Seeding Process

Deposition of Diamond Films on Smooth Surfaces of Cemented Carbide Inserts with Cobalt Boride Interlayers

Effect of Boron Concentration on Adhesion and Cutting Performance of Diamond-Coated Cemented Carbide Tools

Influence on the Performance of CVD Diamond Films by Boronizing on Smooth Cobalt-cemented Tungsten Carbide

Improvement Of Adhesive Strength And Surface Roughness Of Diamond Films On Co-Cemented Tungsten Carbide Tools

Effect of Mechanical Pretreatment on Nucleation and Growth of HFCVD Diamond Films on Cemented Carbide Tools with a Complex Shape

Sandblasting Pretreatment for Deposition of Diamond Films on Wc-Co Hard Metal Substrates

The optimization of the doping level of boron, silicon and nitrogen doped diamond film on Co-cemented tungsten carbide inserts

Effect of Boron-Doped Diamond Interlayer on Cutting Performance of Diamond Coated Micro Drills for Graphite Machining

Synthesis of Nanocrystalline Diamond Films on Smooth Wc-Co Cemented Carbide Substrates

Fabrication and Cutting Performance of Boron-Doped Diamond Coating Inserts

Fabrication and application of high quality diamond-coated tools

Study On The Properties Of Diamond Films On Cemented Carbide Substrates By Surface Implantation Pretreatment Process

Preparation and Milling Performance of Boron-Doped Diamond Composite Coating Cutters

A New Multiple Chemical Pretreatment For Fabrication Of High Quality Cvd Diamond-Coated Drills

Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP

The Effect of Boron Doping on the Morphology and Growth Rate of Micron Diamond Powders Synthesized by Hfcvd Method

Effects of Pretreatment on Quality and Adhesion of Diamond Films on Cemented Carbides

Tribological properties and cutting performance of boron and silicon doped diamond films on Co-cemented tungsten carbide inserts

Performance Evaluation of Diamond Coated Milling Cutter Fabricated Based on Electrostatic Self-Assembly Seeding

Deposition of Smooth Diamond Films with High Adhesive Strength on WC-Co Inserts and Their Cutting Performance in Turning GFRP