Abstract:Ultrasonic imaging is one of the most important and still growing diagnostic tools today. Ultrasonic imaging is more appealing as a clinical imaging modality compared to such imaging modalities as magnetic resonance imaging (MRI), nuclear imaging, and x-ray computed tomography (CT) in that it is more cost-effective, non-invasive, capable of real-time operation, and portable while providing images of comparable quality and resolution. State-of-the-art ultrasonic scanners offer real-time gray scale images of anatomical detail with millimeter spatial resolution superimposed on which is a map of Doppler blood flow information displayed in color. Clinical applications of these devices are still expanding and the operating frequencies of these devices seem to inch higher and higher. High frequency (HF) ultrasound (>20 MHz) yields improved spatial resolution at the expense of a shallower depth of penetration. There are a number of clinical problems that may benefit from high frequency ultrasonic imaging. Intravascular imaging with probes mounted on catheter tips at frequencies higher than 20 MHz with the highest frequency being 60 MHz has been used to characterize atherosclerotic plaque and to guide stent placement and angioplastic procedures. The medical efficacy of ultrasonic imaging of anterior segments of the eye at frequencies higher than 50 MHz in diagnosing glaucoma and ocular tumors and in assisting refractive surgery has been demonstrated. Applications in dermatology for defining tumor involvement and for monitoring treatment, in vascular surgery for characterizing atherosclerotic plaques, and in small animal imaging are also being investigated. To further expand the role of HF ultrasound, probe performance must be improved since current HF ultrasound imaging devices, dubbed “ultrasound biomicroscopes” or “UBMs” by a number of investigators use mechanically scanned single element transducers. Compared to electronic scanning with linear arrays, mechanical scanning of a single element transducer has three major drawbacks: poorer resolution, slower frame rate, and motion of the probe. Single element transducers can only produce beams with a fixed focus which means the spatial resolution of the device is best only within the depth of focus, i.e., in a very tight zone and degrades rapidly beyond the focal point. Mechanical motion of the transducer limits the frame rate, is unreliable, and may cause discomfort and, at worst, hazard to the patient. My presentation will introduce several HF ultrasound transducers currently being developed by the NIH Transducer Resource Center at the University of California. Emphasis will be placed on the construction and implementation of high frequency array transducers. Learning Objectives: 1. Familiarize audience with high frequency ultrasound transducers and their applications.

Enhanced Depth of Field Acoustic Angiography with a Prototype 288-Element Dual-Frequency Array

Implementation of a Novel 288-Element Dual-Frequency Array for Acoustic Angiography: in Vitro and in Vivo Characterization.

Contrast Enhanced Superharmonic Imaging for Acoustic Angiography Using Reduced Form-Factor Lateral Mode Transmitters for Intravascular and Intracavity Applications

Beamforming and Imaging Approaches for Array-Based Dual-Frequency Acoustic Angiography

Characterization of an Array-Based Dual-Frequency Transducer for Superharmonic Contrast Imaging

An Array Transmitter for Dual-Frequency Contrast Enhanced Intravascular Ultrasound Imaging

TU-D-210A-04: Development of High Frequency Ultrasound Transducers for Medical Imaging

Intravascular Confocal Photoacoustic Endoscope with Dual-Element Ultrasonic Transducer.

In Vitro Superharmonic Contrast Imaging Using a Hybrid Dual-Frequency Probe

Acoustic stack for combined intravascular ultrasound and photoacoustic imaging

Stack-Layer Dual-Frequency Ultrasound Array with Ground Shielding for Super-Harmonic Imaging

Adaptive beamforming contrast enhanced super resolution imaging for improved sensitivity and resolution in deep tissues

Improved in vivo photoacoustic microscopy based on a virtual-detector concept

A Novel Dual-Frequency Imaging Method for Intravascular Ultrasound Applications.

Image enhancement in acoustic-resolution photoacoustic microscopy enabled by a novel directional algorithm

Highly Integrated Multiplexing and Buffering Electronics for Large Aperture Ultrasonic Arrays

Sub-aperture Ultrafast Volumetric Ultrasound Imaging for Fully Sampled Dual-mode Matrix Array

40-Mhz Micromachined PMN-PT Composite Ultrasound Array for Medical Imaging

Multi-element synthetic aperture focusing photoacoustic imaging system with real-time digital beamformer technique

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

Stack-Layer Dual-Element Ultrasonic Transducer for Broadband Functional Photoacoustic Tomography