Abstract:The main objective of this study was to optimize bioleaching process parameters for high co-extraction of base metals (Cu, Ni, Zn, and Cr) from hazardous electroplating sludge using an adapted microbial consortium and to explore the relevant bioleaching mechanisms. Microbial cultivation and sludge bioleaching were separated. The effect of the relevant process parameters (i.e., bulk pH, pulp density, and Fe2+ concentration) on the extraction of four selected metals through bioleaching by an adapted microbial consortium was investigated in a 1 L stirred tank reactor. Results indicated that maximum metal solubilization (> 95.6% for each of Cu, Zn, and Ni, and 90.3% of Cr) was achieved at a bulk pH of 2.0, Fe2+ of 9.0 g/L, and pulp density of 15% (w/v). Bioleaching kinetics of the selected metals was described by a modified shrinking core model. This indicated that the interfacial transfer and diffusion across the solid film layer was the rate controlling step and controlled the dissolution kinetics. Data from bioleaching and chemical leaching systems showed that bioleaching had some advantages over simple chemical leaching. The mechanisms of improved Cu, Ni, Zn, and Cr extraction by bioleaching were demonstrated. Bioleaching improved metal release, especially from the residual fraction, as indicated by Community Bureau of Reference (BCR) three-stage sequential extraction analysis. Most of the Cu, Ni, and Zn extraction was attributed to H+ attack, as these metals were primarily distributed in the water/acid soluble and exchangeable fractions, along with Fe and Mn oxyhydroxides (> 72.3%). For the extraction of Cr, besides H+, microorganisms and Fe3+ were also responsible. They improved Cr extraction, especially from the residual fraction. These findings indicate that bioleaching with an adapted microbial consortium appears promising for recycling and reutilizing valuable heavy metals from hazardous electroplating waste.

Bioleaching of Dewatered Electroplating Sludge for the Extraction of Base Metals Using an Adapted Microbial Consortium: Process Optimization and Kinetics

Bioleaching of Copper-Containing Electroplating Sludge

Optimization of Kinetics and Operating Parameters for the Bioleaching of Heavy Metals from Sewage Sludge, Using Co-Inoculation of Two Acidithiobacillus Species.

Cleaner utilization of electroplating sludge by bioleaching with a moderately thermophilic consortium: A pilot study

Removal of Heavy Metals in Sewage Sludge and Losses of Nutrition During Bioleaching

Removal of Heavy Metals from Sewage Sludge with a Combination of Bioleaching and Electrokinetic Remediation Technology

Exploring bioleaching potential of indigenous Bacillus sporothermodurans ISO1 for metals recovery from PCBs through sequential leaching process

Extracting heavy metals from electroplating sludge by acid and bioelectrical leaching using <i>Acidithiobacillus ferrooxidans</i>

Improvement of Sludge Dewaterability and Removal of Sludge-Borne Metals by Bioleaching at Optimum Ph.

Multiple Heavy Metals Extraction and Recovery from Hazardous Electroplating Sludge Waste Via Ultrasonically Enhanced Two-Stage Acid Leaching.

Bioleaching of Metal Concentrates of Waste Printed Circuit Boards by Mixed Culture of Acidophilic Bacteria

Efficient Bioleaching of Heavy Metals from Contaminated Sediment in Batch Method Coupled with the Assistance of Heterotrophic Microorganisms

Bioleaching of Iron, Copper, Lead, and Zinc from the Sludge Mining Sediment at Different Particle Sizes, pH, and Pulp Density Using Acidithiobacillus ferrooxidans

Screening Bioleaching Systems and Operational Conditions for Optimal Ni Recovery from Dry Electroplating Sludge and Exploration of the Leaching Mechanisms Involved

The combination of aerobic digestion and bioleaching for heavy metal removal from excess sludge

A Combination of Bioleaching and Bioprecipitation for Deep Removal of Contaminating Metals from Dredged Sediment.

Reviving Riches: Unleashing Critical Minerals from Copper Smelter Slag Through Hybrid Bioleaching Approach

Bioleaching Of Heavy Metals From Civil Sludge By Indigenous Thiobacillus Ferrooxidans

Understanding and controlling the key phase transformation for selective extracting Ni and Cu from Cr-containing electroplating sludge

Stepwise recovery of Ni, Cu, Zn, and Cr: A green route to resourceful disposal of electroplating sludge

Acid-leaching Mechanism of Electroplating Sludge: Based on a Comprehensive Analysis of Heavy-Metal Occurrence and the Dynamic Evolution of Coexisting Mineral Phases