Abstract:First-principles calculations are carried out to investigate the structural, elastic, and electronic properties of nickel-based model superalloys. The effects of alloying element X (where X = Hf, Ta, Mo, W, Cr, Re, Ru, or Co) on the mechanical characteristics of Ni/Ni3Al ternary multilayer structures are obtained and discussed. The γ’-volume-fraction dependence of mechanical performance is studied in detail for the first time and the calculated elastic parameters are in good agreement with experimental results at room temperature. The influence of alloying elements on bulk modulus is almost independent of γ’ volume fraction. While the effects of alloying elements on shear modulus, Young’s modulus, the ductile and brittle behavior, some particular orientation-dependent elastic moduli and Zener anisotropy factor are closely related to γ’ volume fraction. Alloying additions increase the Young’s and shear moduli, reduce the ductility and lower the anisotropy performance, but the degree of influence on these properties varies with γ’ volume fraction. Among the three γ’ volume fractions investigated in this work, nickel-based ternary model superalloys with 60% γ’ volume fraction have significant improvement in Young’s and shear moduli and thus possess the best comprehensive elastic performance. Furthermore, covalent-like bonding between alloying dopants and host atoms and strong X d- Ni d hybridization account for the superior elastic properties of superalloys with alloying additions. Alloying dopants and Ni atoms from the interface and two phases share a DOS peak just below the Fermi level, and this additional d-d hybridization leads to the exceptional mechanical performance of superalloys with 60% γ’ volume fraction.

Composition Effect on Elastic Properties of Model NiCo-based Superalloys

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

The Effects of Combining Alloying Elements on the Elastic Properties of Γ -Ni in Ni-based Superalloy: High-throughput First-Principles Calculations

Alloying-element Dependence of Structural, Elastic and Electronic Properties of Nickel-Based Superalloys: Influence of Γ’ Volume Fraction

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys

Assessing Elastic Property and Solid-Solution Strengthening of Binary Ni–Co, Ni–Cr, and Ternary Ni–Co–Cr Alloys from First-Principles Theory

Compressive behavior and elastic properties of Ni-based γ/γ’ ternary model superalloys: First-principles calculations and rule of mixtures predications

Magneto-chemical Effects in the Elastic Properties of Co3 Al-based Compounds

Influence of Alloying Elements Upon the Theoretical Tensile Strength of Ni-based Model Superalloy: Γ-Ni/γ′-ni3al Multilayer

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Effect of alloying elements on stacking fault energies of γ and γʹ phases in Ni-based superalloy calculated by first principles

Site preference and effect on shear deformation of co-alloying elements addition to γ′-Ni3Al phase in Ni-based single crystal superalloys

Influence of Co Content on the Microstructures and Mechanical Properties of a Ni–Co Base Superalloy Made by Specific Additive Manufacturing Process

Influence of Alloying Elements on the Elastic Properties of Ternary and Quaternary Nickel-Base Superalloys

Effects of Al and La elements on mechanical properties of CoNiFe0.6Cr0.6 high-entropy alloys: a first-principles study

Elastic Properties of Co-base Alloys: an Ab Initio Study

High-Ti inducing local Eta-phase transformation and creep-twinning in CoNi-based superalloys

Effect of cobalt content on the microstructure, microtexture, and mechanical properties of W-Ni-Fe-xCo alloys during solid-phase-sintering and liquid-phase-sintering

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content