Enhancing direct electron transfer process and power generation in microbial fuel cell using anode of molybdenum-based ternary material
Xiaona Fu,Xu Pan,Qing Wen,Ye Chen,Cunguo Lin,Haiping Gao,Zhenghui Qiu,Liuqingying Yang,Haitao Xu
DOI: https://doi.org/10.1016/j.ijhydene.2024.10.435
IF: 7.2
2024-11-13
International Journal of Hydrogen Energy
Abstract:Microbial fuel cell (MFC) shows potential as an environmentally friendly energy technology, but the low power density restricts their practical applications. In this study, polypyrrole (PPy), carbon nanotubes (CNTs) and MoSe 2 were synthesized into a novel nanocomposite (PPy/MoSe 2 /CNTs) via a straightforward hydrothermal and in situ polymerization approach and served as the anode material of MFC. The charge transfer resistance (R ct ) of the PPy/MoSe 2 /CNTs (4.75 Ω) anode was significantly lower than that of PPy/MoSe 2 (13.75 Ω) anode and MoSe 2 /CNTs (12.36 Ω) anode. Furthermore, the maximum power density of the PPy/MoSe 2 /CNTs-MFC was 4.43 W/m 2 , which was 1.99 times and 1.61 times higher than that of the PPy/MoSe 2 -MFC (2.22 W/m 2 ) and MoSe 2 /CNTs-MFC (2.74 W/m 2 ), respectively. High-throughput sequencing confirmed that PPy/MoSe 2 /CNTs bioanode demonstrated outstanding biocompatibility and the function of screening excellent electrogenic microbes. On the one hand, the good bioelectrocatalytic performance of the PPy/MoSe 2 /CNTs bioanode could be attributed to the abundant pyrrolic nitrogen in PPy, which enhanced the attachment of C-type cytochrome (Omcs) and promoted the direct electron transfer (DET) process between the biofilm and the electrode. In addition, the conductive bridging Mo–N bonds further promoted the direct transfer of electrons in PPy, mediating the long-distance DET process. On the other hand, well-dispersed MoSe 2 not only provided numerous active sites, but also enhanced the Se cycle of microorganisms by affecting their energy metabolism pathways, thereby improving their electricity generation capacity. In addition to the above, the high electrical conductivity of CNTs increased the interfacial charge transfer rate. This study explored the use of molybdenum-based ternary material as anode material to construct high-performance MFC, which provided meaningful information for future practical applications of MFC.
energy & fuels,electrochemistry,chemistry, physical