Abstract:The development of highly efficient modified electrodes is critical for enhancing the power output of microbial fuel cells (MFCs). In this study, different titanium electrodes were modified with functionalized graphene, polyaniline, and their composite (G/PANI) for use in two-chambered MFCs. The results showed that graphene, polyaniline, and G/PANI modification of the cathode improved the maximum power density of MFCs by 74%, 40%, and 126%, respectively, compared with the unmodified control. Among the three materials, G/PANI modification of the anode resulted in the highest open-circuit voltage of MFCs (0.71 V) and recorded the longest operating time for three consecutive cycles (110 h). G/PANI was superior to the other two materials in terms of power generation and it also extended the duration of the operating cycle of MFCs. G/PANI modification of both the cathode and anode improved the maximum power density of MFCs to 124.84 mW.m(-2); this value was 24.8% and 18.9% higher than those obtained by simple modification of the cathode and the anode, respectively. The duration of the operating cycle of MFCs was also markedly extended to 35 h after G/PANI modification of both the cathode and anode. SEM results revealed that the increase in power generation of MFCs with G/PANI-modified electrodes could be attributed to the high surface area of electrodes and the large number of bacteria attached to electrodes. These results have demonstrated that the G/PANI composite can be effective materials for modifying electrodes and improving power generation in two-chambered MFCs.

A Graphene/pyridine Modified Anode to Improve the Performance of Microbial Fuel Cells

Performance of microbial fuel cell with graphene doped bioanode

Enhanced Electricity Generation and Extracellular Electron Transfer by Polydopamine–reduced Graphene Oxide (pda–rgo) Modification for High-Performance Anode in Microbial Fuel Cell

One-step electrosynthesis of polypyrrole/graphene oxide composites for microbial fuel cell application

Applications of Graphene-Modified Electrodes in Microbial Fuel Cells.

One-step Electrochemically Synthesized Graphene Oxide Coated on Polypyrrole Nanowires As Anode for Microbial Fuel Cell

A graphene/poly(3,4-ethylenedioxythiophene) hybrid as an anode for high-performance microbial fuel cells

Graphene/carbon Cloth Anode for High-Performance Mediatorless Microbial Fuel Cells.

High-performance Anode Material Based on S and N Co-Doped Graphene/iron Carbide Nanocomposite for Microbial Fuel Cells

Synergistic Effect Between Poly(diallyldimethylammonium Chloride) and Reduced Graphene Oxide for High Electrochemically Active Biofilm in Microbial Fuel Cell

Enhanced electroactive bacteria enrichment and facilitated extracellular electron transfer in microbial fuel cells via polydopamine coated graphene aerogel anode

Three-dimensional Graphene/pt Nanoparticle Composites As Freestanding Anode for Enhancing Performance of Microbial Fuel Cells

Graphene/Fe 3 O 4 Nanocomposites as Efficient Anodes to Boost the Lifetime and Current Output of Microbial Fuel Cells.

Using Graphene/Polyaniline-Modified Electrodes Enhance the Performance of Two-Chambered Microbial Fuel Cells

Polyaniline Networks Grown On Graphene Nanoribbons-Coated Carbon Paper With A Synergistic Effect For High-Performance Microbial Fuel Cells

In situ formation of graphene layers on graphite surfaces for efficient anodes of microbial fuel cells.

Enhancing Microbial Fuel Cell Performance with Free-Standing Three-Dimensional N-doped Porous Carbon Anodes

Binder-free graphene and manganese oxide coated carbon felt anode for high-performance microbial fuel cell

A hierarchical porous graphene/nickel anode that simultaneously boosts the bio- and electro-catalysis for high-performance microbial fuel cells

A New Method for Fabrication of Graphene/polyaniline Nanocomplex Modified Microbial Fuel Cell Anodes

Enhancing microbial fuel cell performance: anode modification with reduced graphene oxide and iron(III) for improved electricity generation