Abstract:A microwave measurement system for retrieving complex permittivity of liquid sample based on the modified half-mode substrate integrated waveguide (HMSIW) is proposed in this article. The proposed sensing system consists of the passive resonant sensor and the RF circuits. Meanwhile, the passive sensor is evolved from the traditional full-mode SIW, the HMSIW is obtained by cutting along the magnetic wall, and the resonant frequency for TE101 is almost unchanged. By adding a serrated interdigital structure on the top surface of HMSIW, the confinement of the electric field is enhanced and it is beneficial to improve the sensitivity. In addition, the resonant frequency of TE101 shifts toward the low-frequency band, which is beneficial to reduce the electrical size of the passive sensor. The RF circuits are composed of a power divider and a gain/phase detector; it should be noted that the detector can output two dc voltages, i.e., ${V}_{\text {mag}}$ and ${V}_{\text {phs}}$ . As liquid samples with different complex permittivity are loaded at the sensing area, ${V}_{\text {mag}}$ and ${V}_{\text {phs}}$ will have different output dc voltages. According to the relationship among complex permittivity of liquid samples, ${V}_{\text {mag}}$ and ${V}_{\text {phs}}$ , the mathematical models can be established to predict the unknown liquid samples. In measurement, the maximum errors for extracting real and imaginary parts of complex permittivity are −3.84% and 11.72%, respectively. The proposed sensing system has the advantages of discarding the dependence on an expensive vector network analyzer (VNA) and lower the cost.

A High-Q Active Substrate Integrated Waveguide Based Sensor for Fully Characterizing Magneto-Dielectric (MD) Materials

High‐precision Dielectric Sensor System Based on Balanced CSRR‐SIW Resonators

High-Accuracy Complex Permittivity Characterization of Solid Materials Using Parallel Interdigital Capacitor- Based Planar Microwave Sensor

A High Q Substrate Integrated Waveguide Resonator for Microwave Sensing of Low Loss Materials

High-Q Sensor Based on Symmetrical Split Ring Resonator With Spurlines for Solids Material Detection

Highly sensitive refractive-index sensor based on strong magnetic resonance in metamaterials

An Interdigital Microwave Sensor Based on Differential Structure for Dielectric Constant Characteristics Measurement.

Microwave Sensor Loaded With Complementary Curved Ring Resonator for Material Permittivity Detection

A Dual-Band Resonator Sensor for Low Permittivity Characterization

Design and Optimization of Microwave Sensor for the Non-Contact Measurement of Pure Dielectric Materials

Design and Analysis of a Sub-THz Resonator-Based High-Resolution Permittivity Sensor

High Q-Factor Compact Permittivity Sensor Based on Coupled SRR-ELC Metamaterial Element and Metasurfaces Shield

Microwave Measurement System for Characterizing Liquid Samples Based on A Modified HMSIW

A DGS-CPW Microwave Sensor Loaded With SRR for Solid Material Measurement

Extremely Sensitive Microwave Sensor for Evaluation of Dielectric Characteristics of Low-Permittivity Materials

High Q-Factor Hybrid Metamaterial Waveguide Multi-Fano Resonance Sensor in the Visible Wavelength Range

Design and Optimization of a BAW Magnetic Sensor Based on Magnetoelectric Coupling

All-Dielectric Metasurface Refractive Index Sensor with High Figure of Merit Based on Quasi-Bound States in the Continuum

Excitations of Multiple Fano Resonances Based on Permittivity-Asymmetric Dielectric Meta-Surfaces for Nano-Sensors

Ultrahigh Sensitivity Mach−Zehnder Interferometer Sensor Based on a Weak One-Dimensional Field Confinement Silica Waveguide