Abstract:The current challenges faced by microwave planar sensors include their low sensitivity, limited detection range, and difficulties in operating small devices. This study proposes a metamaterial microwave sensor based on CSRR for determining the dielectric constants of liquid and solid materials. The novelty of the proposed sensor lies in the use of curved slots in the CSRR structure to achieve higher electric field concentration and to store a large amount of energy, the determination of the measurement area based on its electric field distribution, and the design of microfluidic channels to further improve the sensitivity to the resonance frequency change. The sensor operates at 2.45 GHz and has dimensions of 40 x 30 x 0.6 mm3. Since the dielectric constant of the contacting object affects the microwave sensor’s resonant frequency, the displacement of the sensor’s resonant frequency is measured using various items. The resonant frequency of the sensor adjusts when materials with varying dielectric constants are introduced into the measurement region. By measuring the frequency point of the measured material at the maximum return loss of the resonator, empirical equations with different coefficients are established to derive the dielectric constants of solids and liquids. The sensitivity and resolution were 4.12% and 102 MHz in solid and 0.78% and 8.4 MHz in liquid. The sensors were tested using five substrate materials commonly used in microwave circuits and different concentrations of ethanol solutions as samples. These findings validate the potential application of the sensor as a cost-effective alternative to expensive commercial sensors for dielectric characterization. The results demonstrate that the sensor possesses high sensitivity, high measurement accuracy, low cost, and easy of fabrication, making it an excellent alternative to expensive commercial sensors for dielectric characterization. This confirms the promising application of the sensor in the field of dielectric constant measurement.

High‐precision Dielectric Sensor System Based on Balanced CSRR‐SIW Resonators

Differential Microwave Microfluidic Sensor Based on Microstrip Complementary Split-Ring Resonator (MCSRR) Structure

A Dual-Scale CSRRs-Based Sensor for Dielectric Characterization of Solid Materials

A Dielectric Constant Measurement System for Liquid Based on SIW Resonator.

A High-Q Active Substrate Integrated Waveguide Based Sensor for Fully Characterizing Magneto-Dielectric (MD) Materials

An Interdigital Microwave Sensor Based on Differential Structure for Dielectric Constant Characteristics Measurement.

Solid Permittivity Measurement Sensor Based with IDE-ELC Substrate Integrated Waveguide Resonator

A DGS-CPW Microwave Sensor Loaded With SRR for Solid Material Measurement

CSRR Metamaterial Microwave Sensor for Measuring Dielectric Constants of Solids and Liquids

High-Sensitivity Sensor Loaded with Coupled Complementary Spiral Resonators for Simultaneous Permittivity and Thickness Measurement of Solid Dielectric Sheet

A Microwave Sensor Based on Split Ring Resonators for Differential Measuring Permittivity

A Dual-Band Resonator Sensor for Low Permittivity Characterization

Highly Sensitive Differential Microwave Sensor Using Enhanced Spiral Resonators for Precision Permittivity Measurement

Extremely Sensitive Microwave Sensor for Evaluation of Dielectric Characteristics of Low-Permittivity Materials

Automated and Precise Dielectric Measurement Systems at Millimeter Wavelengths Using Open Resonator Technique

Open Resonator System for Automatic and Precise Dielectric Measurement at Millimeter Wavelengths

High-Q Active Microwave Sensor Based on Microstrip Complementary Split-Ring Resonator (MCSRR) Structure for Dielectric Characterization

Dual-band microwave sensor based on cross-finger MCSRR Research

Design of OCSRR-Based Differential Microwave Sensor for Microfluidic Applications

A Miniaturized Differential Microwave Microfluidic Sensor with High Decoupling