Stress, Roughness and Reflectivity Properties of Sputter-Deposited B4C Coatings for X-Ray Mirrors

Jia-Li Wu,Run-Ze Qi,Qiu-Shi Huang,Yu-Fei Feng,Zhan-Shan Wang,Zi-Hua Xin
DOI: https://doi.org/10.1088/0256-307x/36/12/120701
2019-01-01
Chinese Physics Letters
Abstract:Boron carbide (B4C) coatings have high reflectivity and are widely used as mirrorsfor free-electron lasers in the x-ray range.However,B4 C coatings fabricated by direct-current magnetron sputtering show a strong compressive stress of about-3 GPa.By changing the argon gas pressure and nitrogen-argon gas mixing ratio,we are able to reduce the intrinsic stress to less than-1 GPa for a 50-nm-thick B4C coating.It is found that the stress in a coating deposited at 10 m Torr is-0.69 GPa,the rms roughness of the coating surface is 0.53 nm,and the coating reflectivity is 88%,which is lower than those of coatings produced at lower working pressures.When the working gas contains 8% nitrogen and 92% argon,the B4C coating shows not only-1.19 GPa stress but also a low rms roughness of 0.16 nm,and the measured reflectivity is 93% at the wavelength of 0.154 nm.
What problem does this paper attempt to address?