Abstract:In order to investigate the tensile deformation behavior of ultra-high-strength-steel BR1500HS, a series of isothermal tensile experiments were carried out in a temperature range of 1023 similar to 1123 K and a strain rate range of 0.01 similar to 10 s(-1) on a Gleeble-3500 thermo-mechanical simulator. The results indicate that the flow stress initially increases to a peak value and then decreases gradually to a steady state. Based on the analysis of the effect of strain, temperature and strain rate on flow stress, dynamic recrystallization (DRX) type softening characteristics of the stress-strain curve with single peak were identified. The flow stress level decreases with increasing temperature and decreasing strain rate. By regression analysis for Arrhenius type equation, the hot deformation activation energy Q and material constants (n, alpha, beta and A) were calculated. Further, the Arrhenius-type constitutive equation of flow stress was developed by considering the effect of strain on the variable coefficients (including activation energy Q, material constants n, alpha, and A). The validity of the developed constitutive equation incorporating the influence of strain was evaluated through comparing the experimental and predicted data. Furthermore, the predictability of the developed model was also evaluated using two standard statistical parameters, correlation coefficient (R) and average absolute relative error (AARE). And R-value and AARE-value for the model are 0.997 and 4.06% respectively, which indicates that the developed model can precisely estimate the flow behavior for BR1500HS alloy throughout the entire temperature and strain rate range.

A Comparative Study on Constitutive Modeling for Flow Behavior of Ultra-Supercritical Steel at High Temperature

A Comparative Study of Constitutive Models for Flow Stress Behavior of Medium Carbon Cr-Ni-Mo Alloyed Steel at Elevated Temperature

A Modified Constitutive Model for Tensile Flow Behaviors of BR1500HS Ultra-High-Strength Steel at Medium and Low Temperature Regions

Flow Stress Characteristics and Constitutive Modeling of Typical Ultrahigh‐Strength Steel under High Temperature and Large Strain

A Modified Johnson Cook Constitutive Model for Aermet 100 at Elevated Temperatures

A Comparative Study on Modified and Optimized Zerilli-Armstrong and Arrhenius-Type Constitutive Models to Predict the Hot Deformation Behavior in 30si2mncrmove Steel

Hot behavior of supercritical martensitic stainless steel at elevated temperature

Constitutive Modeling for Elevated Temperature Flow Behavior of 42crmo Steel

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Constitutive modeling and analysis on high-temperature flow behavior of 25 steel

A Comparative Study on Arrhenius and Johnson–Cook Constitutive Models for High-Temperature Deformation of Ti2AlNb-Based Alloys

A combined Johnson–Cook and Zerilli–Armstrong model for hot compressed typical high-strength alloy steel

A Modified Johnson-Cook Model for 10%cr Steel at Elevated Temperatures and a Wide Range of Strain Rates

Comparative Study on Several Constitutive Models of GCr15 Steel at High Strain Rates

Phenomenological Constitutive Modeling of High-Temperature Flow Behavior Incorporating Individual and Coupled Effects of Processing Parameters in Super-austenitic Stainless Steel

New Constitutive Model for Hot Working

Analysis of the High Temperature Plastic Deformation Characteristics of 18CrNi4A Steel and Establishment of a Modified Johnson–Cook Constitutive Model

Modeling the constitutive relationship of Cr 20Ni 25Mo 4Cu superaustenitic stainless steel during elevated temperature

Modified Johnson-Cook Constitutive Model for Dynamic Compressive Behaviors of C250 Maraging Steel at Different Temperatures

A Modified Constitutive Equation for Elevated Temperature Flow Behavior of Ti–6Al–4V Alloy Based on Double Multiple Nonlinear Regression

Constitutive Modeling for Tensile Behaviors of Ultra-High-Strength-Steel Br1500hs at Different Temperatures and Strain Rates