Abstract:Constitutive models play a significant role in understanding the deformation behavior of materials and in optimizing the manufacturing process. In order to improve the reliability of calculation results, the high temperature flow behavior of TA31 titanium alloy obtained from an annealed hot-rolled plate has been investigated by a Gleeble-3500 thermo-mechanical simulator. The isothermal hot compression tests are conducted in the temperature range of 850 to 1050 °C and the strain rate range from 0.001 to 10 s−1 with a height reduction of 60%. The annealed TA31 shows a dynamic recovery characteristic during thermo-mechanical processing. The experimental data have been used to develop an Arrhenius-type constitutive model and a modified Johnson–Cook model under the consideration of coupling effect on strain, temperature, and strain rate, as well as the strain-softening phenomenon. The material parameters are determined by a global optimization method based on the initial values by means of a regression method. A comparation of the predicted results has been performed based on the modified Johnson–Cook model and those acquired from the Arrhenius-type model. The correlation coefficient and average absolute relative error of the modified Johnson–Cook model are 4.57% and 0.9945, respectively. However, when the optimization method has been applied, they are 15.77% and 0.9620 for the Arrhenius-type model, respectively. These results indicate that the modified Johnson–Cook model is more accurate and efficient in predicting the flow stress of annealed TA31 titanium alloy under a set of model material parameters. Furthermore, the simple mathematical expression of this model is helpful to incorporate it into the finite element software to obtain detailed and valuable information during the thermo-mechanical processing simulation for TA31 in further work.

A Modified Constitutive Model for Tensile Flow Behaviors of BR1500HS Ultra-High-Strength Steel at Medium and Low Temperature Regions

Constitutive Modeling for Tensile Behaviors of Ultra-High-Strength-Steel Br1500hs at Different Temperatures and Strain Rates

A Comparative Study on Constitutive Modeling for Flow Behavior of Ultra-Supercritical Steel at High Temperature

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Modeling the Hot Tensile Flow Behaviors at Ultra-High-Strength Steel and Construction of Three-Dimensional Continuous Interaction Space for Forming Parameters

A Modified Johnson-Cook Model of As-Quenched AA2219 Considering Negative to Positive Strain Rate Sensitivities over a Wide Temperature Range

Constitutive modeling and analysis on high-temperature flow behavior of 25 steel

Flow Stress Characteristics and Constitutive Modeling of Typical Ultrahigh‐Strength Steel under High Temperature and Large Strain

A Comparative Study on Modified and Optimized Zerilli-Armstrong and Arrhenius-Type Constitutive Models to Predict the Hot Deformation Behavior in 30si2mncrmove Steel

A modified Johnson–Cook model for tensile behaviors of typical high-strength alloy steel

A Modified Johnson Cook Constitutive Model for Aermet 100 at Elevated Temperatures

Flow behaviors and constitutive model of 300M high strength steel at elevated temperature

A Comparative Study of Constitutive Models for Flow Stress Behavior of Medium Carbon Cr-Ni-Mo Alloyed Steel at Elevated Temperature

The Comparation of Arrhenius-Type and Modified Johnson–Cook Constitutive Models at Elevated Temperature for Annealed TA31 Titanium Alloy

Constitutive Modeling for Elevated Temperature Flow Behavior of 42crmo Steel

A Modified Constitutive Equation for Elevated Temperature Flow Behavior of Ti–6Al–4V Alloy Based on Double Multiple Nonlinear Regression

Constitutive Analysis on Thermal-Mechanical Properties of WHT1300HF High Strength Steel

Modeling the constitutive relationship of Cr 20Ni 25Mo 4Cu superaustenitic stainless steel during elevated temperature

A Modified Johnson-Cook Model for 10%cr Steel at Elevated Temperatures and a Wide Range of Strain Rates

A Modified Johnson–Cook Model for Modeling AA6061-T6 under Different Temperatures Considering Ductile Fracture

Strain Rate-Temperature Effects and Constitutive Models for Q690D QT Steel