Abstract:Flexible wearable electronics have been developing rapidly in recent years, and one of its core devices, thin‐film transistor (TFT), is also attracting attention. Current TFT preparation processes usually require high annealing temperatures (>350°C), which is not conducive to their application on most flexible substrates (PET, PEN and nanopaper, etc.). In this paper, we propose a strategy for the room temperature preparation of Nd:AIZO/Al2O3 dual‐layer TFT devices, which have appreciable electrical properties without additional annealing treatment. We have used Taguchi orthogonal experimental methods to investigate the effects of three essential process parameters on the performance of the films and devices. We analyze the test results of XRR, μ‐PCD, XPS of the films and correlate them with TFTs electrical performance. As Nd:AIZO deposition time decreases and Al2O3 oxygen percentage and time during deposition increase, the μsat and SS of TFT devices are improved. With the preferred combination of parameters applied to the device preparation, the device exhibits a saturation mobility μsat of 24.3 cm2V‐1s‐1, a threshold voltage Vth of ‐1.4 V, a subthreshold swing SS of 0.21 V/decade and an Ion/Ioff ratio of 4.26×108. The ultra‐thin Al2O3 layer act as defect modification and form high‐speed electron transport in channel layer. This dual‐layer structure reduced the localized defect states in the back‐channel region and the water‐oxygen adsorption. The room temperature preparation of the dual‐layer TFT process proposed in this paper is compatible with large‐size low‐cost flexible substrates. It has great potential for application in green flexible wearable electronics. This article is protected by copyright. All rights reserved.

High-Performance and Flexible Neodymium-Doped Indium-Zinc-Oxide Thin-Film Transistor with All Copper Alloy Electrodes

High-Performance and Flexible Neodymium- Doped Oxide Semiconductor Thin-Film Transistors with Copper Alloy Bottom-Gate Electrode

Alloy-Electrode-Assisted High-Performance Enhancement-Type Neodymium-Doped Indium-Zinc-Oxide Thin-Film Transistors on Polyimide Flexible Substrate

Amorphous NdIZO Thin Film Transistors with Contact-Resistance-Adjustable Cu S/D Electrodes

High-Performance Thin Film Transistor with an Neodymium-Doped Indium Zinc Oxide/Al2O3 Nanolaminate Structure Processed at Room Temperature

Highly conductive and adhesive ternary Cu–Cr–Zr alloy electrode for flexible optoelectronic applications

Thin-Film Transistors with Neodymium-Incorporated Indium–Zinc-Oxide Semiconductors

High‐performance Nd: AIZO/Al2O3 dual active layer design without thermal annealing: high‐speed electron transport and defect modification in thin film transistors

Study on Cu-Cr-Zr Alloy Based High Performance Copper Interconnects Technology for Next Generation Flexible Display

Low-Voltage High-Stability Indium–Zinc Oxide Thin-Film Transistor Gated by Anodized Neodymium-Doped Aluminum

Fabrication of Flexible Amorphous Indium-Gallium-Zinc-Oxide Thin-Film Transistors by a Chemical Vapor Deposition-Free Process on Polyethylene Napthalate

High-Performance Flexible a-IGZO TFTs Adopting Stacked Electrodes and Transparent Polyimide-Based Nanocomposite Substrates

High Conductivity and Adhesion of Cu-Cr-Zr Alloy for TFT Gate Electrode

Graphitic Carbon Nitride/Polyvinylpyrrolidone Composite Dielectric for Low-Voltage Flexible InZnO Thin Film Transistor Grown on a Polyethylene Terephthalate Substrate

All-Sputtering, High-Transparency, Good-Stability Coplanar Top-Gate Thin Film Transistors

High-Performance Flexible ZnO Thin-Film Transistors by Atomic Layer Deposition

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates

36.3: Flexible ZnO Thin‐Film Transistors Fabricated on PEN Substrate by Atomic Layer Deposition at Low Temperature

DC and AC Performance of InGaZnO Thin-Film Transistors on Flexible PEEK Substrate

Amorphous Indium-zinc-oxide Thin-film Transistors with Copper Source/Drain Electrodes

Flexible Amorphous Oxide Thin-Film Transistors on Polyimide Substrate for AMOLED