Abstract:Low-cost nitrogen-enriched activated carbons (PNACs) with high microporosity were prepared by a simple one-step activation doping process using KOH as a chemical activator and melamine formaldehyde (MF) as a nitrogen source. These PNACs have shown great potential as effective CO 2 adsorbents. The resulting PNACs were mainly microporous structure, with surface areas ranging from 736 to 2144 m 2 /g and total pore volumes ranging from 0.565 to 1.366 cm 3 /g. The CO 2 adsorption capacities of PNACs were in the range of 2.353 to 6.068 mmol/g and 1.59 to 4.131 mmol/g at 0 °C and 25 °C under 1 bar, respectively. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The experimental isotherm data were analyzed using various equations and the Toth isotherm equation was found to be the most accurate mathematical model to describe the CO 2 adsorption isotherm of the activated carbon. This result further confirms that PNACs have a non-homogeneous pore structure. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The exceptional CO 2 adsorption properties can be attributed to the high microporosity and nitrogen content of the PNACs. The relationship between the physicochemical properties and CO 2 adsorption performance of the activated carbon was further investigated by relevance analysis. At 0 °C and 1 bar, it was observed that the pore structure played a predominant role in the CO 2 adsorption process of PNACs. During this condition, PNACs mainly exhibited physical adsorption, which was primarily governed by the microporous filling mechanism. However, at 25 °C and 1 bar, both microporosity and nitrogen content contribute equally to the CO 2 adsorption effect. This observation confirms that the pore structure and nitrogen functional groups work synergistically to influence the CO 2 adsorption performance of PNACs. The adsorption mechanism of PNACs can be described as physical adsorption, driven by the cooperation between nitrogen functional groups and the filling of micropores. This innovative one-step activation doping process successfully converts agricultural and plastic waste into sustainable and high-performance CO 2 adsorbents. It provides new insights for mitigating the greenhouse effect and addressing the issue of plastic pollution.

Preparation of pistachio shell-based porous carbon and its adsorption performance for low concentration CO 2

One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance

The fabrication of porous N-doped carbon from widely available urea formaldehyde resin for carbon dioxide adsorption

Preparation of Nitrogen-Doped Activated Carbon from Bio-Oil Residue for Efficient CO2 Adsorption

N-doped porous carbon derived from macadamia nut shell for CO 2 adsorption

Tailoring Nitrogen‐Doped Activated Carbons: Central Composite Design for Enhanced CO2 Adsorption

Freundlich, Langmuir, Temkin, DR and Harkins-Jura Isotherm Studies on the Adsorption of CO2 on Various Porous Adsorbents

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption

Superior CO2 Adsorption on Pine Nut Shell-Derived Activated Carbons and the Effective Micropores at Different Temperatures

Ultra-microporous Biochar-Based Carbon Adsorbents by a Facile Chemical Activation Strategy for High-Performance CO2 Adsorption

Ultra-microporous biochar-based carbon adsorbents by a facile chemical activation strategy for high-performance CO 2 adsorption

Experimental Study and Thermodynamic Analysis of Carbon Dioxide Adsorption onto Activated Carbons Prepared from Biowaste Raw Materials

The adsorption properties of microporous activated carbon prepared from pistachio nut shell for low-concentration VOCs under low-medium temperatures

Sustainable preparation of hierarchical porous carbon from discarded shells of crustaceans for efficient CO2 capture

Enhancing CO 2 adsorption performance of porous nitrogen-doped carbon materials derived from ZIFs: Insights into pore structure and surface chemistry

The effects of nitrogen functional groups and narrow micropore sizes on CO2 adsorption onto N-doped biomass-based porous carbon under different pressure

Effect of Structural and Compositional Alterations on the Adsorption and Selectivity of CO2 in Hazelnut Shell-Derived Activated Carbons

CO2adsorption on Crab Shell Derived Activated Carbons: Contribution of Micropores and Nitrogen-Containing Groups

Preparation of Nitrogen-Doped Cellulose-Based Porous Carbon and Its Carbon Dioxide Adsorption Properties