The adsorption properties of microporous activated carbon prepared from pistachio nut shell for low-concentration VOCs under low-medium temperatures

Tangying Cheng,Jinjin Li,Xiuwei Ma,Lei Zhou,Hao Wu,Linjun Yang
DOI: https://doi.org/10.1007/s11356-021-14586-y
IF: 5.8
2021-07-06
Environmental Science and Pollution Research
Abstract:The control of low-concentration VOCs in coal-fired flue gas is one of the research hotspots at present. In this work, K2CO3 and K2CO3-KCl were employed to activate the agricultural wastes (pistachio nut shell) to prepare activated carbon (AC), named PSAC-1 and PSAC-2, respectively. By testing the adsorption performance of the prepared AC and commercial activated carbon (CAC) for the five target VOCs, it was observed that the adsorption capacity of PSAC-2 was the best compared to the other two. Particularly, the adsorption capacity of PSAC-2 (225 mg·g-1) for phenol was 3.8 times that of CAC (59 mg·g-1). In addition, the pseudo-first-order model, pseudo-second-order model, and Elovich model all fitted the adsorption process well, which indicated that both physical adsorption and chemical adsorption existed simultaneously, in which physical adsorption played a dominant role and chemical adsorption played a minor role. Weber-Morris kinetic model was used to illustrate the rate-controlling mechanism; the results confirmed that the stage of external membrane mass transfer was the control stage of adsorption rate. The results of this study can provide some references for the commercial production of biomass-derived AC and the removal of VOCs in coal-fired flue gas.Graphical abstract
environmental sciences
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is the control of the emission of low - concentration volatile organic compounds (VOCs) in coal - fired flue gas. Specifically, the research aims to activate agricultural waste (pistachio shells) by using activators (such as K₂CO₃ and K₂CO₃ - KCl) to prepare microporous activated carbon (AC), and evaluate its adsorption performance for low - concentration VOCs under low - to - medium - temperature conditions. The following are the key points of the paper: 1. **Background and Problem**: - With the development of China's economy and the acceleration of the urbanization process, the emissions of VOCs are continuously increasing. - VOCs in coal - fired flue gas are not only harmful to human beings, animals and plants, but may also be precursor substances of ozone, dioxins and aerosols, causing serious harm to the environment. - At present, most studies focus on the control of low - temperature and high - concentration VOCs, while VOCs in coal - fired flue gas have the characteristics of large gas volume and medium - high temperature, and are difficult to be effectively treated by existing methods. 2. **Research Purposes**: - To explore the effects of different activators on the pore structures of activated carbon (PSAC - 1 and PSAC - 2) prepared from pistachio shells. - To evaluate the adsorption performance of these activated carbons for five target VOCs (benzene, toluene, p - xylene, p - dichlorobenzene and phenol). - To analyze the adsorption kinetic models to reveal the adsorption mechanism, and provide references for the commercial production of biomass - derived activated carbon and the removal of VOCs in coal - fired flue gas. 3. **Experimental Design**: - Two kinds of activated carbon, PSAC - 1 and PSAC - 2, were prepared by using K₂CO₃ and K₂CO₃ - KCl as activators. - The adsorption performance of commercial activated carbon (CAC) was compared. - Pseudo - first - order, pseudo - second - order, Elovich and Weber - Morris kinetic models were used to analyze the adsorption behavior and mechanism. 4. **Main Findings**: - PSAC - 2 showed the best adsorption performance, especially its adsorption capacity for phenol (225 mg·g⁻¹) was 3.8 times that of commercial activated carbon (59 mg·g⁻¹). - The adsorption process conformed to the pseudo - first - order, pseudo - second - order and Elovich models, indicating that physical adsorption played a dominant role and chemical adsorption played a secondary role. - The Weber - Morris kinetic model showed that the external film mass transfer stage was the control step of the adsorption rate. 5. **Conclusion**: - The research results provide valuable references for the commercial production of biomass - derived activated carbon and the removal of VOCs in coal - fired flue gas. Through these studies, the paper shows how to use agricultural waste to prepare high - efficiency activated carbon, thereby achieving a low - cost and environmentally - friendly VOCs control technology.