Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

MoS2-carbon based nanocomposites as anodes for lithium-ion batteries: A review

MoS2-based anode materials for lithium-ion batteries: Developments and perspectives

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Novel C/MoS2 hollow nanocomposites enhance lithium storage in battery anodes

Two-dimensional architecture of N,S-codoped nanocarbon composites embedding few-layer MoS2 for efficient lithium storage

MoS2‐on‐MXene Heterostructures As Highly Reversible Anode Materials for Lithium‐Ion Batteries

Carbon Nanofibers Decorated by MoS2 Nanosheets with Tunable Quantity as Self-Supporting Anode for High-Performance Lithium Ion Batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

MoS2-Based Nanocomposites for Electrochemical Energy Storage

Revisiting lithium-storage mechanisms of molybdenum disulfide

Progress of transition metal sulfides used as lithium-ion battery anodes

CoS2–MnS@Carbon nanoparticles derived from metal–organic framework as a promising anode for lithium-ion batteries

Monodisperse MoS2/Graphite Composite Anode Materials for Advanced Lithium Ion Batteries

Interconnected MoO 2 /MoS 2 @NC nanosheets as anodes with high-rate and long-life for lithium-ion and sodium-ion batteries

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

A novel MoS2/C nanocomposite as an anode material for lithium-ion batteries

Opportunities and challenges of nano Si/C composites in lithium ion battery: A mini review

Carbon Nanofibers Decorated with Molybdenum Disulfide Nanosheets: Synergistic Lithium Storage and Enhanced Electrochemical Performance

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

MoS2/SnS Heterostructure Composite for High-Performance Lithium-Ion Battery Anodes