Abstract:Background: Ultrasonic motors (USM) are based on the concept of driving the rotor by a mechanical vibration excited on the stator via piezoelectric effect. USM exhibit merits such as simple structure, quick response, quiet operation, self-locking when power off, nonelectromagnetic radiation and higher position accuracy.Principal Findings: A cylindrical type traveling wave ultrasonic motor using cantilever type composite transducer was proposed in this paper. There are two cantilevers on the outside surface of cylinder, four longitudinal PZT ceramics are set between the cantilevers, and four bending PZT ceramics are set on each outside surface of cantilevers. Two degenerate flexural vibration modes spatially and temporally orthogonal to each other in the cylinder are excited by the composite transducer. In this new design, a single transducer can excite a flexural traveling wave in the cylinder. Thus, elliptical motions are achieved on the teeth. The actuating mechanism of proposed motor was analyzed. The stator was designed with FEM. The two vibration modes of stator were degenerated. Transient analysis was developed to gain the vibration characteristic of stator, and results indicate the motion trajectories of nodes on the teeth are nearly ellipses.Conclusions: The study results verify the feasibility of the proposed design. The wave excited in the cylinder isn't an ideal traveling wave, and the vibration amplitudes are inconsistent. The distortion of traveling wave is generated by the deformation of bending vibration mode of cylinder, which is caused by the coupling effect between the cylinder and transducer. Analysis results also prove that the objective motions of nodes on the teeth are three-dimensional vibrations. But, the vibration in axial direction is minute compared with the vibrations in circumferential and radial direction. The results of this paper can guide the development of this new type of motor.

Improving the Efficiency of a Hollow Ultrasonic Motor by Optimizing the Stator's Effective Electromechanical Coupling Coefficient.

Improving Efficiency of Traveling Wave Rotary Ultrasonic Motor by Optimizing Stator

Optimization research of stator with two degree-of-freedom traveling-wave spherical ultrasonic motor

Modeling and Optimal Design of the Rotary-Linear Type Two-Degree-of-Freedom Ultrasonic Motors

Development of a Radial-Torsional Vibration Hybrid Type Ultrasonic Motor with a Hollow and Short Cylindrical Structure

Conic section traveling ultrasonic motor with high speed and efficiency

An Efficient Approach to Optimize the Vibration Mode of Ultrasonic Motors

A ring-type traveling wave ultrasonic motor using optimized design of piezoelectric ceramics

Improvement mechanism of energy conversion efficiency in ultrasonic motor with flexible rotor

A Cylindrical Traveling Wave Ultrasonic Motor Using a Circumferential Composite Transducer

A Rotary Traveling Wave Ultrasonic Motor with Four Groups of Nested PZT Ceramics: Design and Performance Evaluation

Characterization and Design of A Hollow Cylindrical Ultrasonic Motor

Study on Eigenfrequency Degeneration of Longitudinal and Torsional Vibrations in a Hybrid Ultrasonic Motor

Research on operang characteristcs of V-shaped ultrasonic motor based on improved electromechanical coupling model

A traveling wave ultrasonic motor with a metal/polymer-matrix material compound stator

A New Traveling Wave Ultrasonic Motor Using Thick Ring Stator with Nested PZT Excitation

Dynamic Analysis and Performance Simulation of a Traveling Wave Type and Rod Shape Ultrasonic Motor

A Novel Multi-Degree-of-Freedom Ultrasonic Motor with a Composite Ring-Shaped Stator

Development of a novel radial-torsional hollow ultrasonic motor and contact interface coating test

A Piezoelectric Microultrasonic Motor With High <italic>Q</italic> and Good Mode Match

Rotary-linear ultrasonic motor with cylindrical sandwich vibrator