Abstract:Background: Ultrasonic motors (USM) are based on the concept of driving the rotor by a mechanical vibration excited on the stator via piezoelectric effect. USM exhibit merits such as simple structure, quick response, quiet operation, self-locking when power off, nonelectromagnetic radiation and higher position accuracy.Principal Findings: A cylindrical type traveling wave ultrasonic motor using cantilever type composite transducer was proposed in this paper. There are two cantilevers on the outside surface of cylinder, four longitudinal PZT ceramics are set between the cantilevers, and four bending PZT ceramics are set on each outside surface of cantilevers. Two degenerate flexural vibration modes spatially and temporally orthogonal to each other in the cylinder are excited by the composite transducer. In this new design, a single transducer can excite a flexural traveling wave in the cylinder. Thus, elliptical motions are achieved on the teeth. The actuating mechanism of proposed motor was analyzed. The stator was designed with FEM. The two vibration modes of stator were degenerated. Transient analysis was developed to gain the vibration characteristic of stator, and results indicate the motion trajectories of nodes on the teeth are nearly ellipses.Conclusions: The study results verify the feasibility of the proposed design. The wave excited in the cylinder isn't an ideal traveling wave, and the vibration amplitudes are inconsistent. The distortion of traveling wave is generated by the deformation of bending vibration mode of cylinder, which is caused by the coupling effect between the cylinder and transducer. Analysis results also prove that the objective motions of nodes on the teeth are three-dimensional vibrations. But, the vibration in axial direction is minute compared with the vibrations in circumferential and radial direction. The results of this paper can guide the development of this new type of motor.

Dynamic and Kinetic Analyses of the Stator of A Cylindrical Ultrasonic Motor

Dynamic analysis of cylindrical type ultrasonic motor based on Euler

Dynamic Analysis and Performance Simulation of a Traveling Wave Type and Rod Shape Ultrasonic Motor

Optimization research of stator with two degree-of-freedom traveling-wave spherical ultrasonic motor

Motion analysis of a point on the stator of a wobbling type ultrasonic motor based on Euler angles

Analytical modeling of stator vibration for surface mount permanent magnet brushless motors

Modeling and tests for a stator of a traveling-wave type spherical ultrasonic motor with 2-DOF

Design And Analysis Of A Cylindrical Ultrasonic Motor Using Bending Transducer

The Driving Mathematic Model of Spherical Traveling-wave Type Ultrasonic Motor

Statics Analysis of 3 DOF Spherical Traveling Wave Ultrasonic Motor Based on a Spiral Form of Spring

Contact Mode and Force Transferring Model of Cylindrical Ultrasonic Motors with Bending Vibration Modes

Dynamic Analysis of Composite Stator of Ultrasonic Motor Based on Substructure Interface Loading Theory

Force Transmission Model Of A Cylindrical Linear Ultrasonic Motor

Kinetic Model of Three Degree-of-Freedom Traveling Wave Type Ultrasonic Motor

An Analytical Model of the Stator Vibration in the Hollow Ring Type Traveling Wave Ultrasonic Motor

Design and Analysis of a Cylindrical Standing Wave Ultrasonic Motor Using Cantilever and Sandwich Type Transducers

The Kinematic Analysis Of Three-Degree Of Freedom Cylindrical Ultrasonic Motors

A Novel Two-Degree-of-freedom Spherical Ultrasonic Motor Using Three Travelling-Wave Type Annular Stators

Study on Analytical Modeling of the Stator of Longitudinal and Torsional Hybrid Type Ultrasonicmotor

A Cylindrical Traveling Wave Ultrasonic Motor Using a Circumferential Composite Transducer

An Efficient Approach to Optimize the Vibration Mode of Ultrasonic Motors