Impacts of composite flocculant in coagulation/ultrafiltration hybrid process for treatment of humic acid water: the role of basicity

Chenghui Yu,Baoyu Gao,Xue Shen,Fan Bu,Bo Jin,Qinyan Yue

DOI: https://doi.org/10.1080/09593330.2020.1716856

IF: 3.475

2021-01-01

Environmental Technology

Abstract:The effects of the composite flocculant, polyaluminium chloride and poly dimethyldiallylammonium chloride (PACl-PDMDAAC) in comparison with PACl on coagulation efficiencies and membrane fouling in coagulation-ultrafiltration (C-UF) process were analysed, which was conducted in the conditions of different basicity (B) values and the presence of Mg2+. Results showed that PACl-PDMDAAC enhanced the ability of charge neutralization and absorption bridging, and improved the coagulation efficiency. When B value was 1.5, the flocculant hydrolyzed to form more Al-b morphology and effectively removed HA molecules. The presence of Mg2+ could improve the coagulation performance through bridging ability. The results of the ultrafiltration test showed that the flux reduction for PACl was 70%, while the flux reduction for PACl-PDMDAAC was 60% in C-UF process. PACl-PDMDAAC could effectively reduce membrane fouling mainly by reducing strongly attached cake/gel layer. When B value was 1.5, the Al-b content of the flocculant was higher and the ability of adsorption charge neutralization was strong, resulting in forming a stable cake layer. Therefore, the membrane fouling was the lightest. In addition, the presence of Mg2+ in raw water reduced the membrane fouling.