Abstract:Competing fatigue failure between the surface and internal nucleation has been widely observed in metals under the high cycle fatigue regime. To characterize different boundary conditions in surface and internal grain aggregates, a hybrid statistical volume element model was developed by binding two identical periodic stochastic polycrystal microstructure cubes together and superimposing them with a new 2.5 directional periodic boundary condition afterwards. Additional isotropic elastic media was attached on the surface of the hybrid statistical volume element model to represent the oxide layer formed at elevated temperature. Microstructure-sensitive modeling with a crystal plasticity model was implemented by computing multiple hybrid statistical volume elements under two stress levels. The results implied that grains in the surface volume of the hybrid statistical volume element generally tended to deform more easily than their counterparts in the internal one, and the oxide layer had a weak effect in suppressing the surface deformation. It was also demonstrated that the combination of the 2.5 directional periodic boundary condition, additional oxide layer and nonlinear constitutive model jointly brought stochastic effect into the two identical microstructural cubes. Significant competition between the surface and internal nucleation was captured under both stress levels. Since the detrimental influence of oxidation in accelerating crack formation was not considered, the lifetimes from both types of nucleation were overlaid on each other. Given the disruption of the oxide layer under high stress levels, the simulation reproduced the experimental discovery that the probability of surface nucleation increases with the ascending stress level. It is also clarified that the oxide layer cannot prevent surface nucleation under low stress levels, rejecting the hypothesis of the impact of the oxide layer on complete internal nucleation.

Micro-plastic fatigue damage mechanism governing shape instability behavior

Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model

Probabilistic Simulation of Shape Instability Based on the True Microstructure Model

Shape-instability Life Scatter Prediction of 40cr Steel: Damage-coupled Crystal Plastic Probabilistic Finite Element Method

Microdamage In Polycrystalline Ceramics Under Dynamic Compression And Tension

A Constitutive Framework for Micro-to-macroplasticity of Crystalline Materials under Monotonic and Cyclic Deformation

Micro-failure of metals under inhomogeneous plastic deformation

A Crystal Plasticity Model of Low Cycle Fatigue Damage Considering Dislocation Density, Stress Triaxiality and Lode Parameter

A crystal plasticity-based microdamage model and its application on the tensile failure process analysis of 7075 aluminum alloy

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

Deformation in Fatigue Crack Tip Plastic Zone and Its Role in Crack Propagation of Titanium Alloy with Tri-Modal Microstructure

Micromechanical modelling of the effect of plastic deformation on the mechanical behaviour in pseudoelastic shape memory alloys

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

Investigating Ductile Failure At The Microscale In Engineering Steels: A Micromechanical Finite Element Model

Microstructure-sensitive Modeling of Competing Failure Mode Between Surface and Internal Nucleation in High Cycle Fatigue

Experimental and Computational Study of Microstructural Effect on Ductile Fracture of Hot-Forming Materials

A Quantitative Link Between Microplastic Instability and Macroscopic Deformation Behaviors in Metallic Glasses

Crystal Plasticity Model of Surface Integrity Effects on Fatigue Properties after Milling: an Investigation on AISI 4140 Steel

Microplasticity Behavior Study of Equiaxed Near-Β Titanium Alloy under High-Cycle Fatigue Loading: Crystal Plasticity Simulations and Experiments

Crystal Plasticity Model Analysis for the Macro-to-Micro Mechanical Behavior of Different Sub-Regions in a Marine Steel Weld

Modelling of Micro-Plasticity Evolution in Crystalline Materials