Abstract:Competing fatigue failure between the surface and internal nucleation has been widely observed in metals under the high cycle fatigue regime. To characterize different boundary conditions in surface and internal grain aggregates, a hybrid statistical volume element model was developed by binding two identical periodic stochastic polycrystal microstructure cubes together and superimposing them with a new 2.5 directional periodic boundary condition afterwards. Additional isotropic elastic media was attached on the surface of the hybrid statistical volume element model to represent the oxide layer formed at elevated temperature. Microstructure-sensitive modeling with a crystal plasticity model was implemented by computing multiple hybrid statistical volume elements under two stress levels. The results implied that grains in the surface volume of the hybrid statistical volume element generally tended to deform more easily than their counterparts in the internal one, and the oxide layer had a weak effect in suppressing the surface deformation. It was also demonstrated that the combination of the 2.5 directional periodic boundary condition, additional oxide layer and nonlinear constitutive model jointly brought stochastic effect into the two identical microstructural cubes. Significant competition between the surface and internal nucleation was captured under both stress levels. Since the detrimental influence of oxidation in accelerating crack formation was not considered, the lifetimes from both types of nucleation were overlaid on each other. Given the disruption of the oxide layer under high stress levels, the simulation reproduced the experimental discovery that the probability of surface nucleation increases with the ascending stress level. It is also clarified that the oxide layer cannot prevent surface nucleation under low stress levels, rejecting the hypothesis of the impact of the oxide layer on complete internal nucleation.

Probabilistic Simulation of Shape Instability Based on the True Microstructure Model

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Shape-instability Life Scatter Prediction of 40cr Steel: Damage-coupled Crystal Plastic Probabilistic Finite Element Method

Micro-plastic fatigue damage mechanism governing shape instability behavior

Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model

Simulation of microplasticity-induced deformation in uniaxially strained ceramics by 3-D Voronoi polycrystal modeling

Microstructure-sensitive Modeling of Competing Failure Mode Between Surface and Internal Nucleation in High Cycle Fatigue

Finite Element Modeling of Tensile Instability of Sheet Metals Considering Nonuniform Mechanical Properties

Microstructural Simulation During Plastic Deformation

A Data-Driven Approach for Instability Analysis of Thin Composite Structures

A Stochastic Micromechanical Model for Multiphase Composites Containing Spherical Inhomogeneities

Dynamic Simulation of the Kernel Formation, Instability and the Multi-Interface Microstructures in the Process of Martensitic Phase Transition

A Quantitative Link Between Microplastic Instability and Macroscopic Deformation Behaviors in Metallic Glasses

Three-Dimensional Micromechanical Model for Quasi-Brittle Solids with Residual Strains under Tension

Dynamic Plastic Instability Prediction of Sheet Stretching by Using Elastic Crystalline-viscoplastic FE Method

A semi-numerical algorithm for instability of compressible multilayered structures

Probabilistic failure mechanisms via Monte Carlo simulations of complex microstructures

Integrated Simulation, Machine Learning, and Experimental Approach to Characterizing Fracture Instability in Indentation Pillar-Splitting of Materials

Numerical Modeling of Compressive Failure Mechanisms in Ceramic Materials at High Strain Rates

Predicting the flow stress and dominant yielding mechanisms: analytical models based on discrete dislocation plasticity

Modelling of Micro-Plasticity Evolution in Crystalline Materials