Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

A Drag Model Considering the Particle Size Distribution Via Multi-Subgrid for the Simulation of Downer

Development and Validation of Filtered Drag Models for Fluidization of Low-Density Geldart A Particles

Models of Interphase Drag Force from Direct Numerical Simulations of Upward Turbulent Particle-Laden Channel Flows

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Drag Model from Interface-Resolved Simulations of Particle Sedimentation in a Periodic Domain and Vertical Turbulent Channel Flows

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

Modeling total drag force exerted on particles in dense swarm from experimental measurements using an inline image-based method

Modelling of filtered drag force for clustered particle-laden flows based on interface-resolved simulation data

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

Eulerian-Lagrangian simulation of hydrodynamics of gas-solid flows in downer

An approach for drag correction based on the local heterogeneity for gas–solid flows

Eulerian-Lagrangian Simulation of Distinct Clustering Phenomena and Rtds in Riser and Downer

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

A generalized drag Law for heterogeneous gas-solid flows in fluidized beds

A New Drag Model of Chain-Like Agglomerates in Stokes Region

Numerical Simulation of the Accumulation of Heavy Particles in a Circular Bounded Vortex Flow

Homogeneous drag models in gas–solid fluidization: Big data analytics and conventional correlation

Drag Model of Finite-Sized Particle in Turbulent Wall-Bound Flow over Sediment Bed

Drag Force Model Corrections Based on Nonuniform Particle Distributions in Multi-Particle Systems

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed