Abstract:In this contribution, the design and manufacturing of an all-metal coaxial-line X-band bandpass filter is discussed. The device is 3D-printed as a self-supported structure without any dielectric inside the coaxial. The mechanical support between the inner and outer coaxial-line conductors is provided by means of short-circuited stubs, which are also used in the bandpass filter design. The real transmission zeros (TZs) produced by the short-circuited stubs are responsible for a high filter selectivity. In order to enhance the filter performance, a second stage consisting in a coaxial-line stepped-impedance low-pass filter is integrated in the design to provide the rejection level required for the out-of-band behaviour. Following our design method, the bandpass and low-pass filters are designed separately, and a final matching step is performed to connect both and to achieve the aimed frequency specifications. In this way, a monoblock coaxial filter with very good in-band and out-of-band performance can by obtained by using an additive manufacturing (AM) procedure. Only the input/output (I/O) coaxial connectors will need to be assembled to the filter to perform the frequency measurements. The filters in this work can be seen as a first proposal towards more complex multi-functional monoblock structures using additively-manufactured coaxial technology, for highly-integrated RF chains. Other expected benefits beyond the compactness or lightweight are an increased RF shielding, electrostatic discharge risk reduction, and Passive Intermodulation (PIM) protection. In the paper, a prototype with a passband between 8 and 12 GHz is designed and manufactured, using a bandpass filter with three stubs and an integrated 15th-order low-pass filter, providing rejection for spurious frequencies up to 30 GHz. The filter is manufactured using Selective Laser Melting (SLM) and measurements show an excellent agreement with the simulations.

A Connectorized X-Band 3-D Printed Air-Filled Self-Suspended Rectangular Coaxial Transmission Line

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

3-D Printed Vertically Integrated Composite Right/Left-Handed Transmission Line and Its Applications to Microwave Circuits

A W‐band Air‐filled Coaxial Bandpass Filter Employing Micro Metal Additive Manufacturing Technology

Design of an Additively-Manufactured Self-Supported All-Metal Coaxial-Line X-Band Bandpass Filter

A Full X-Band Fully 3-D Printed E-Plane Rectangular-Coax-to-Waveguide Transition

3D-Printed Spoof Surface Plasmon Polaritons Transmission Line for Compact System Interconnection in Ka-Band

Wideband Air‐Filled Coaxial Filter Line

A 0.22–26.5-Ghz Ultra-Wideband Directional Coupler Based on Copper Additive Manufacturing

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure

Microfabrication of Coaxial Filter without Internal Conductor Support

A 3D Printed Waveguide Hybrid Bandpass Filter Integrated with Twisting and Bending Functionalities

Compact bilateral single conductor surface wave transmission line

Design and Experimentally Verification of a Vertical Coaxial Transmission Structure in High resistivity Si Interposer

An X-Band Lightweight 3-D Printed Slotted Circular Waveguide Dual-Mode Bandpass Filter

Characterizations of Rectangular Coaxial Line Fabricated on Silicon Substrate

A 3D Printed V-Band Twisted Monolithic Waveguide Bandpass Filter

Ka-Band Monolithic Stereolithography 3-D Printed Broadband Passive Waveguide Devices

A 3-D Printed $E$ -Plane Waveguide Magic-T Using Air-Filled Coax-to-Waveguide Transitions