Abstract:High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications, such as high-performance heat transfer enhancement and surface plasmon devices. However, the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing techniques. This study proposes a novel cutting-based process, namely elliptical vibration chiseling (EV-chiseling), for the high-efficiency texturing of surface microstructures with an ultrahigh aspect ratio. Unlike conventional cutting, EV-chiseling superimposes a microscale elliptical vibration on a backward-moving tool. The tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material deformation. Thanks to the tool's backward movement, the chip is left on the material surface to form a microstructure rather than falling off. Since one microstructure is generated in one vibration cycle, the process can be highly efficient using ultrafast (>1 kHz) tool vibration. A finite element analysis model is established to explore the process mechanics of EV-chiseling. Next, a mechanistic model of the microstructured surface generation is developed to describe the microstructures' aspect ratio dependency on the process parameters. Then, surface texturing tests are performed on copper to verify the efficacy of EV-chiseling. Uniformed micro ribs with a spacing of 1~10 μm and an aspect ratio of 2~5 have been successfully textured on copper. Compared with the conventional EV-cutting that uses a forward-moving tool, EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 times. The experimental results also verify the accuracy of the developed surface generation model of microstructures. Finally, the effects of elliptical trajectory, depth of cut (DoC), tool shape, and tool edge radius on the surface generation of micro ribs have been discussed.

Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations

Analytical modeling of subsurface damage and material removal energy in elliptical vibration cutting of micro-structures on brittle materials

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Experimental and analytical study of ultrasonic elliptical vibration cutting of micro-pyramid reflective mold based on guided wave transmission

Developmental and Experimental Study on a Double-Excitation Ultrasonic Elliptical Vibration-Assisted Cutting Device

Insight into surface formation mechanism during ultrasonic elliptical vibration cutting of tungsten alloy by scratching experiment and molecular dynamics

On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practical nominal cutting velocity

Elliptical vibration chiseling: a novel process for texturing ultra-high-aspect-ratio microstructures on the metallic surface

Experimental and simulation investigation of ultrasonic elliptical vibration cutting of tungsten alloys in ultra-precision machining

Surface/subsurface formation mechanism of tungsten during ultrasonic elliptical vibration cutting

On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity

Modulated Vibration Texturing of Hierarchical Microchannels with Controllable Profiles and Orientations

Ultrasonic End Fly Cutting of Micro-Structured Surfaces on Single-Crystal Brittle Materials

Sculpturing of single crystal silicon microstructures by elliptical vibration cutting

An Ultrafast 2-D Non-Resonant Cutting Tool for Texturing Micro-Structured Surfaces

Effects of vibration trajectory on ductile-to-brittle transition in vibration cutting of single crystal silicon using a non-resonant tool

A Novel Ultrasonic Elliptical Vibration Cutting Device Based on a Sandwiched and Symmetrical Structure

Design of ultrasonic elliptical vibration cutting system for tungsten heavy alloy

Design and Implementation of a Novel Single-Driven Ultrasonic Elliptical Vibration Assisted Cutting Device

Design Optimization of Ultrasonic Vibration Cutting Tool to Generate Well-Decoupled Elliptical Trajectory

Mechanically Enabled Two-Axis Ultrasonic-Assisted System for Ultra-Precision Machining