Abstract:The corrosion and leakage issues of rapid quench boilers have become increasingly prominent in ethylene plants, significantly disrupting the regular functioning of equipment. In pursuit of a more efficacious corrosion protection strategy, a study was conducted on the heat exchange tubes experiencing corrosion leakage in the quenching boiler of a petrochemical company. By means of macroscopic observation, chemical composition analysis, mechanical property analysis, metallographic analysis, fracture surface morphology observation, and energy spectrum analysis, combined with on-site process parameters, a comprehensive analysis of the failure causes of the corroded leakage sites was conducted. It was concluded that the perforation of the heat exchange tubes was caused by high-temperature oxygen corrosion and oxidation induced by scale accumulation, and reasonable countermeasures were proposed. According to X-ray diffraction analysis (XRD), it was found that the scale mainly consisted of Fe2O3 and Fe3O4, and the scale formation time was relatively long. It is speculated that the accumulation of scale is caused by the rust from the upstream equipment pipelines of the boiler water being carried into the quenching boiler with the fluid flow and accumulating at this location. Regarding the heat exchange tubes, the primary causes of failure are high-temperature oxygen corrosion and oxidation. To verify whether the relevant reactions can occur spontaneously, the critical transition temperature of the reactions is calculated using the free entropy function method. The calculated critical temperature for the occurrence of high-temperature oxygen corrosion and oxidation in the heat exchange tubes under failure conditions is determined to be T ＜ 1058 K ~ 785 °C. Therefore, under the conditions of heat exchange tube failure, high-temperature oxygen corrosion and oxidation can occur spontaneously.

Failure Analysis on Unexpected Perforation of Heat Exchanger Tube in Methacrylic Acid Reboiler of Specialty Chemical Plant

Failure Analysis on Abnormal Leakage of Shell and Tube Heat Exchanger in Specialty Chemical Plant

Analysis of Causes and Protective Measures against Corrosion Perforation in the Shell-Side Outlet Flange of a Sour Water Steam Heater

Analysis of Frequent Tube Burst of High Temperature Reheater in 600 MW Unit

Comprehensive Corrosion Failure Analysis of Hal77-2 Alloy Tubes Serving in a Low Temperature Multi-Effect Distillation Plant: from Feature Analysis to Corrosion Mechanisms

Failure Analysis on Abnormal Bursting of Heat Transfer Tubes in Spiral-Wound Heat Exchanger for Nuclear Power Plant

Failure Analysis of Stainless Steel Heat Exchanger Tubes in a Petrochemical Plant

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Corrosion Failure Analysis for Heat Transfer Tube in Quick Cooled Oil-Dilute Steam Heat Exchanger

Failure Analysis on Premature Perforation of Multiple Effect Evaporators in Vacuum Salt Making System

Root Causes Analysis and Countermeasures on Unexpected Perforation of Tee Pipe in the Steam System of Specialty Chemical Plant

Experimental and simulative failure analysis of reformer furnace outlet manifolds serviced in aromatic plant

Failure analysis of a rapid quench boiler for ethylene cracker

Failure analysis of one peculiar ‘Yin-Yang’ corrosion morphology on heat exchanger tubes in purified terephthalic acid (PTA) dryer

Failure Analysis of T12 Boiler Re-Heater Tubes During Short-Term Service

Failure analysis in heat exchanger tubes from the top system of the regeneration tower of the hydrotreatment unit in an oil refinery: a case study

Failure analysis of reheater tubes in a 350 MW supercritical circulating fluidized bed boiler

Failure Analysis of HP Steel Tube Rupture of Hydrogen Reformer in a Refinery

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Failure Analysis of Some Petrochemical Plant Components