Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Preferential Growth of Coherent Precipitates at Grain Boundary

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

B2-precipitation induced optimization of grain boundary character distribution in an Al0.3CoCrFeNi high-entropy alloy

The Preferred-Site Tendency of Alloying Element Nb in Fe Γ Phase and Its Effect on Grain Boundary Cohesion

Influence of Grain Boundary Segregation on the Deformation Behavior of Nanocrystalline Ni50Co50 Solid Solution Alloys Investigated by Molecular Dynamics Simulations

Precipitation Thermodynamics in an Al–Zn–Mg Alloy with Different Grain Sizes

Discontinuous Precipitation Initiated At Interphase Boundaries In A Zn-Rich Zn-6.3 At.% Ag Alloy

Interaction Between Coherent Second-Phase Particles and Migrating Boundaries: Boundary Effect and Particle Reorientation

Precipitation behavior of the M23C6 phase on the coherent twin boundary of 25Cr-20Ni-Nb-N steel

The dependence of precipitate morphology on the grain boundary types in an aged Al–Cu binary alloy

Thermal Stability and Strengthening Effect of Coherent Precipitates in a (FeCoNi)92Al2.5Ti5.5 High Entropy Alloy

Study of Β Precipitation and Layer Structure Formation in Al 5083: the Role of Dispersoids and Grain Boundaries

Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy

Segregation of alloying elements at the bcc-Fe/B2–NiAl interface and the corresponding effects on the interfacial energy

Grain boundary precipitation behavior in Re-containing nickel-based directionally solidified superalloys with carbon and boron additions

The importance of grain boundaries on the reactive elements effect in β-NiAlHf alloy

Intermetallic Growth and Interfacial Properties of the Grain Refiners in Al Alloys

Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries

The Influence of Grain Boundaries on Crystal Structure and Tensile Mechanical Properties of Al0.1CoCrFeNi High-Entropy Alloys Studied by Molecular Dynamics Method