Abstract:Side-channel attacks (SCAs) represent a significant security threat, and aim to reveal otherwise secret data by analyzing a relevant circuit’s behavior, e.g., its power consumption. While all circuit components are potential power side channels, D-flip-flops (DFFs) are often the primary source of information leakage to an SCA. This paper proposes a DFF design based on the three-independent-gate field-effect transistor (TTGFET) that reduces side-channel vulnerabilities of sequential circuits. Notably, we find that the I-V characteristics of the TIGFET itself leads to inherent side-channel resilience, which in turn enables simpler and more efficient cryptographic hardware. Our proposed design is based on a prior TIGFET-based true single-phase clock (TSPC) DFF design, which offers high performance and reduced area. More specifically, our modified TSPC (mTSPC) design exploits the symmetric I-V characteristics of TIGFETs, which results in pull-up and pull-down currents that are nearly identical. When combined with additional circuit modifications (made possible by the unique characteristics of the TIGFET), the mTSPC circuit draws almost the same amount of supply currents under all possible input transitions (less than 1% variation for different transitions), which can in turn mask information leakage. Using a 10nm TIGFET technology model, simulation results show that the proposed TIGFET-based DFF circuit leads to decreased power consumption (up to 96.9% when compared to the prior secured designs), has a low delay (15.2 ps), and employs only 12 TIGFET devices. Furthermore, an 8-bit S-box whose output is sampled by a group of eight mTSPC DFFs was simulated. A correlation power analysis attack on the simulated S-box with 256 power traces shows that the key is not revealed, which confirms the SCA resiliency of the proposed DFF design.

TG-SPP: A One-Transmission-Gate Short-Path Padding for Wide-Voltage-Range Resilient Circuits in 28-nm CMOS

A Dedicated Greedy Short Path Padding Solution Method For Error Resilient Circuit Designs

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

Timing error resilient clock gate design for wide-voltage application

Design Of Variable Latency Adder Based On Present And Transitional States Prediction

An Effectiveness-Oriented Greedy Heuristic for Padding Short Paths in Ultra-Low Supply Voltage Designs

A Light-Weight Energy-Efficient Resilient Circuit for Variation Tolerance

A Timing Failure Tolerance Design with In-Field Simultaneous Error Detection and Correction.

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Ultra Low Overhead Error Mask Flip-Flop in Near Threshold Voltage Processor Design

A new error masking flip-flop with one cycle correction penalty

An Energy-Efficient Microprocessor Using Multilevel Error Correction For Timing Error Tolerance

Low-Power Redundant-Transition-Free TSPC Dual-Edge-Triggering Flip-Flop Using Single-Transistor-Clocked Buffer

SGERC: a Self-Gated Timing Error Resilient Cluster of Sequential Cells for Wide-Voltage Processor.

A Novel TIGFET-based DFF Design for Improved Resilience to Power Side-Channel Attacks

Error-Resilient Integrated Clock Gate for Clock-Tree Power Optimization on a Wide Voltage IOT Processor

A Power Efficient BIST TPG Method on Don't Care Bit Based 2-D Adjusting and Hamming Distance Based 2-D Reordering

iEDCL: Streamlined, False-Error-Free Error Detection and Correction Scheme in a Near-Threshold Enabled 32-bit Processor

Edsu: Error Detection And Sampling Unified Flip-Flop With Ultra-Low Overhead

The Optimization of Spacer Engineering for Capacitor-Less DRAM Based on the Dual-Gate Tunneling Transistor

Negative Design Margin Realization through Deep Path Activity Detection Combined with Dynamic Voltage Scaling in a 55 nm Near-Threshold 32-Bit Microcontroller