Abstract:Titanium carbides attract attention from both academic and industry fields because of their intriguing mechanical properties and proven potential as appealing candidates in the variety of fields such as nanomechanics, nanoelectronics, energy storage and oil/water separation devices. A recent study revealed that the presence of Ti8C5 not only improves the impact strength of composites as coatings, but also possesses significant strengthening performance as an interlayer material in composites by forming strong bonding between different matrices, which sheds light on the design of impact protection composite materials. To further investigate the impact resistance and strengthening mechanism of Ti8C5, a pilot Molecular Dynamics (MD) study utilizing comb3 potential is carried out on a Ti8C5 nanosheet by subjecting it to hypervelocity impacts. The deformation behaviour of Ti8C5 and the related impact resist mechanisms are assessed in this research. At a low impact velocity ~0.5 km/s, the main resonance frequency of Ti8C5 is 11.9 GHz and its low Q factor (111.9) indicates a decent energy damping capability, which would eliminate the received energy in an interfacial reflection process and weaken the shock waves for Ti8C5 strengthened composites. As the impact velocity increases above the threshold of 1.8 km/s, Ti8C5 demonstrates brittle behaviour, which is signified by its insignificant out-of-plane deformation prior to crack initiation. When tracking atomic Von Mises stress distribution, the elastic wave propagation velocity of Ti8C5 is calculated to be 5.34 and 5.90 km/s for X and Y directions, respectively. These figures are inferior compared with graphene and copper, which indicate slower energy delocalization rates and thus less energy dissipation via deformation is expected prior to bond break. However, because of its relatively small mass density comparing with copper, Ti8C5 presents superior specific penetration. This study provides a fundamental understanding of the deformation and penetration mechanisms of titanium carbide nanosheets under impact, which is crucial in order to facilitate emerging impact protection applications for titanium carbide-related composites.

Study on the Damage Mechanism of TiN/Ti Coatings Based on Multi-Directional Impact

Atomistic Investigation of Titanium Carbide Ti8C5 under Impact Loading

Damage Evolution Behavior of TiN/Ti Multilayer Coatings under High-Speed Impact Conditions

Damage Analysis Of Tin/Ti Coatings Under Cycling Impact With Hard Particles

Study on the Impact Erosion Wear Resistance and Damage Evolution of TiN Films under Different Impact Cycles

A Method for Evaluating the Impact Wear Behavior of Multilayer TiN/Ti Coating

Effects of Mechanical Properties and Layer Structure on the Cyclic Dynamic Loading of TiN-based Coatings

Deformation behavior and wear resistance of hard TiCN and TiCN/Ti coatings on Ti6Al4V alloy

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Performance and Damage Mechanism of TiN/ZrN Nano-Multilayer Coatings Based on Different Erosion Angles

Effect of Multi-Interfacial Structure on Fracture Resistance of Composite TiSiN/Ag/TiSiN Multilayer Coating

Effects of Different Substrates on Micromechanical and Tribology Properties of TiN Films

Study on fatigue and wear behaviors of a TiN coating using an inclined impact-sliding test

Investigations in Anti-Impact Performance of TiN Coatings Prepared by Filtered Cathodic Vacuum Arc Method under Different Substrate Temperatures

Designed Ti/TiN sub-layers suppressing the crack and erosion of TiAlN coatings

Substrate Effects on the Micro/Nanomechanical Properties of TiN Coatings

The Mechanical Behaviour of Tin and Multi-Layered Coating of Tin/Ti on Ti6al4v Substrate During Nano-Indentation

Mechanical Properties of TiN Coatings Studied Via Nanoindentation and Nanoscratch Test

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Crack Resistance Enhancement of Gradient Bias TiN/Ti Multilayer Coating by Ti Sputtering

Simulation of TiN/Ti Multilayer Coating under the Impact of Multiple Particles Based on Cohesive Element