CO2 Low Salinity Water Alternating Gas: A New Promising Approach for Enhanced Oil Recovery
Cuong T.Q. Dang,Long X. Nghiem,Zhangxin Chen,Ngoc T.B. Nguyen,Quoc P. Nguyen
DOI: https://doi.org/10.2118/169071-ms
2014-01-01
Abstract:It has been recognized that there are significant advantages on combining low salinity waterflooding (LSW) with other enhanced oil recovery (EOR) techniques such as polymer or low tension surfactant flooding. This paper proposes a novel concept of low salinity water-alternating-CO2 (CO2 LSWAG) injection under CO2 miscible displacement conditions. While LSW is an emerging EOR method based on alteration of wettability from oil-wet to water-wet conditions, WAG is a proven method for improving gas flooding performance by controlling the gas mobility. Therefore, LSWAG injection promotes the synergy of the mechanisms underlying these methods (i.e., ion-exchange, wettability alteration, and CO2 miscible displacement and mobility control) that further enhances oil recovery and overcomes the late production problem frequently encountered in the conventional WAG. These features are demonstrated in this work based on a field case study. To investigate the advantages of CO2 LSWAG, a comprehensive ion exchange model associated with geochemical processes has been developed and coupled to the multi-phase multi-component flow equations in an equation-of-state compositional simulator. Laboratory core flood simulations of different CO2 LSWAG schemes are conducted to understand the combined effects of solubility of CO2 in brine, dissolution of carbonate minerals, ion exchange, and wettability alteration. CO2 LSWAG performance is then evaluated on a field scale through an innovative workflow that includes geological modeling, multiphase multi component reservoir flow modeling and process optimization. The simulation results indicate that CO2 LSWAG has the highest oil recovery compared to conventional high salinity waterflood, high salinity WAG, and low salinity waterflood. A number of geological realizations are generated to assess the geological uncertainty effect, in particular clay distribution uncertainties, on CO2 LSWAG efficiency. Finally, CO2 LSWAG injection strategies are optimized by identifying key WAG parameters. The proposed workflow demonstrates the synergy between CO2 WAG and LSW. Built in a robust reservoir simulator, it serves as a powerful tool for screening, design, optimization, and uncertainty assessment of the process performance from laboratory to and field scales. CO2 LSWAG is a promising EOR technique as it not only combines the benefits of CO2 injection and low salinity water floods but also promotes the synergy between these processes through the interactions between geochemical reactions associated with CO2 injection, ion exchange process, and wettability alteration. This paper demonstrates the merits of this process through modeling, optimization and uncertainty assessment. Introduction The modification of the injected brine composition could improve the oil recovery factor of conventional waterflooding up to 38% (Web et al., 2004), leading to a new concept of optimal injection brine composition for waterflooding. Other than using high salinity reservoir water, extensive laboratory experiments (Tang and Morrow, 1997; Morrow et al., 1998; Tang and Morrow, 1999a; Tang and Morrow, 1999b; Zhang and Morrow, 2006; Kumar et al., 2010; Lohardjo et al, 2010) and pilot tests (McGuire et al., 2005; Lager et al., 2008; Skrettingland et al., 2010; Thyne and Gamage, 2011) have confirmed the advantages of using low salinity brine as an injected fluid on the oil recovery for both secondary and tertiary modes. LSW has received increasing attention in the oil industry and is currently indentified as an important EOR technique as it shows more advantages than conventional chemical EOR methods in terms of chemical costs, environmental impact, and field