Abstract:From the perspective of reducing surface tension and improving ion diffusion, a Li‐GaP composite lithium anode with high wettability and ion‐conductive phase of Li3P is fabricated, which can efficiently decrease the area specific resistance, enhance the critical current density, and improve the cycling stability for using in solid‐state lithium batteries. The urgent demand for high energy and safety batteries has generated the rapid development of Li6.4La3Zr1.4Ta0.6O12 (LLZTO) type solid‐state lithium metal batteries. However, severe dendritic lithium growth, which is caused by poor interfacial contact of the Li/LLZTO interface and loss of electrical contact during cycles due to low intrinsic Li+ diffusion coefficient of lithium, greatly hampers its practical application. Here, from the point of view of reducing surface tension and improving ion diffusion of lithium, a composite lithium anode (CLA) with high wettability and ion diffusion coefficient is prepared by adding GaP into molten lithium, thus strengthening the CLA/LLZTO interface even in cycling. As envisioned, compared to pure lithium, CLA presents lower surface tension, larger adhesion work, and higher ion diffusion coefficient, ensuring close contact of the CLA/LLZTO interface. Therefore, the assembled symmetric cells exhibit a low area specific resistance of 4.5 Ω cm2, a large critical current density of 2.5 mA cm−2, and ultra‐long lifespan of 5700 h at 0.3 mA cm−2 at 25 °C. Meanwhile, full cells coupled with LiFePO4 cathode show a high‐capacity retention of 97.32% after 490 cycles at 1C. This work provides a new solution to the interfacial challenges of solid‐state lithium‐metal batteries.

Realization of the Li+ Domain Diffusion Effect Via Constructing Molecular Brushes on the LLZTO Surface and Its Application in All-Solid-state Lithium Batteries

Microscopic Origin of the Ionic Transport Behaviors in Solid Electrolytes for Li Batteries

A Solid-State Electrolyte Based on Electrochemically Active LiMn2O4 for Lithium Metal Batteries

Superionic Conductor Enabled Composite Lithium with High Ionic Conductivity and Interfacial Wettability for Solid‐State Lithium Batteries

Mesoscopic Framework Enables Facile Ionic Transport in Solid Electrolytes for Li Batteries

In-situ constructed lithium-salt lithiophilic layer inducing bi-functional interphase for stable LLZO/Li interface

Vitrified Metal-Organic Framework Composite Electrolyte Enabling Dendrite-Free and Long-Lifespan Solid-State Lithium Metal Batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Building continuous Li-ion transport channel from cathode to anode in solid-state lithium metal battery

Ion/Electron Conductive Layer with Double-Layer-Like Structure for Dendrite-Free Solid-State Lithium Metal Batteries

Achieving multi-dimensional Li + transport nanochannels via spatial-partitioning in crystalline ionic covalent organic frameworks for highly stable lithium metal anode

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery

Enabling ultrafast lithium-ion conductivity of Li2ZrCl6 by indium doping

Reduced Energy Barrier for Li+ Transport Across Grain Boundaries with Amorphous Domains in LLZO Thin Films

Self assembled electron blocking and lithiophilic interface towards dendrite-free solid-state lithium battery

Artificial Interlayer and Special Electrode Structure Design in a Solid-State Battery to Homogenize Li-Ion Transport

High‐Areal‐Capacity and Long‐Cycle‐Life All‐Solid‐State Lithium‐Metal Battery by Mixed‐Conduction Interface Layer

Construction of Composite Lithium with High Adhesion Work and Fast Ionic Conductivity by Black Phosphorus for Solid-State Lithium Batteries

Recent Progress in Lithium Lanthanum Titanate Electrolyte towards All Solid-State Lithium Ion Secondary Battery