Abstract:This paper presents a novel control methodology which uses an extremely low-resolution encoder to achieve a desired harmonic trajectory. The particular application of interest is a cellular microinjection technology called the Ros-Drill (Rotationally Oscillating Drill) for ICSI (Intra-Cytoplasmic Sperm Injection). It is an inexpensive set-up, which creates high-frequency (e.g. 500 Hz) and small-stroke (e.g. 0.2 degree) rotational oscillations at the tip of an injection pipette mimicking a harmonic motion profile. Such a motion control procedure presents no particular difficulty when it uses motion sensors with appropriate resolution. However, size, costs and accessibility of technology on hardware components for our charter severely constrain the sensory capabilities. The main objective is to achieve rotational amplitudes with peak-to-peak stroke of 0.4 degree and frequency of 500 Hz, using an encoder with resolution of 0.09 degree. This low-resolution encoder (which provides only 4 encoder steps for the entire stroke) presents two complications, a) large quantization errors at and between two successive measurements; b) stochasticity of actual amplitude for the desired discrete encoder readings. This paper proposes a method which enables accurate peak-to-peak stroke control using the same hardware, by essentially converting a stochastic stroke control problem into a deterministic dwell time balancing operation. The study describes a control strategy consisting of two-stage tuning: 1) coarse tuning which provides a 4-step desired encoder readings in peak-to-peak swings, 2) fine tuning which adapts the control gains to achieve the actual peak-to-peak stroke based on the deterministic relationships between the oscillation amplitudes and the encoder readings. Simulations and experiments are provided to validate the proposed method.

Precise Phase Demodulation Algorithm for Sinusoidal Encoders and Resolvers

Linearization interpolation method with high robustness and high accuracy for sinusoidal encoders

Phase Demodulation Strategy Based on Kalman Filter for Sinusoidal Encoders

Electronic Interpolation Interface Based on Linear Subdivision Method for Sinusoidal Optical Encoders

Undesirable Oscillations of Phase Locked Loop-Based Position and Speed Estimator for Sensorless Control

Development of a Digital Interpolation Module for High-Resolution Sinusoidal Encoders

A Successive Approximate Angle Track Converter for Sinusoidal Encoders

Design of A Precise and Robust Linearized Converter for Optical Encoders Using A Ratiometric Technique

An Adaptive Approach Based on Neural Network and Phase-Locked Loop for Correcting Quadrature Sinusoidal Signals of Magnetic Encoders

Ratiometric-Linearization-Based High-Precision Electronic Interpolator for Sinusoidal Optical Encoders

An Effective Algorithm to Achieve Accurate Sinusoidal Amplitude Control with a Low-Resolution Encoder

Design of a Precision Resolver Signal Measurement Algorithm Based on Phase Sensitive Detection

Demodulation of Angular Position and Velocity from Resolver Signals Via Chebyshev Filter-Based Type III Phase Locked Loop

Precise and robust position estimation for optical incremental encoders using a linearization technique

Quadrature Sinusoidal Signals Correction of Magnetic Encoders Via Radial Basis Function Neural Network and Adaptive Loop Shaping.

Research on Subdivision System of Sin-Cos Encoder Based on Zero Phase Bandpass Filter

Sinusoidal Phase-Modulating Interferometer with Ellipse Fitting and a Correction Method

Synchronous In-Phase and Quadrature Demodulation Technique for Resonant Micro-Optic Gyroscope.

Demodulation Algorithm of Magnetic Encoder With Specified Harmonic Elimination

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

Sinusoid Wave Frequency Estimation Combined Algorithm Based on Quinn Algorithm and Phase Difference Correction Algorithm